Chine Changeur de prise hors excitation utilisé pour le transformateur d'huile Fabricants

PARAMÈTRES DU PRODUIT

Description
DEMANDER UN DEVIS

Description

Off excitation Tap Changer used for Oil Transformer

$14-30 /Pièce/Pièces

Type de paiement:L/C,T/T,D/P,D/A,Paypal,Paiement de Petit Montant,Western union,D/A
Incoterms:GOUSSET,CFR,CIF,EXW,SAF,FCA,CPT,CIP,DEQ,DDP,DDU,Livraison express,DAF,DES
PDDN min.. Commande:100 Pièce/Pièces
PDNanportation:Océan,Atterrir,Air,Exprimer,Exprimer

Option:

63A/10KV

125A/10KV

250A/10KV

400A/10KV

63A/35KV

125A/35KV

250A/35KV


Échantillon:

$20.00 /Pièce/Pièces, 1 Pièce/Pièces (Max.. Commande)
Acheter un échantillon

Description du produitLuoyang Datang EnergyPhotoelectron s'engage dans le R&D, fabrication, et vente de divers supports, haut, et transformateurs basse tension et accessoires de transformateur. Les accessoires du transformateur comprennent principalement le relais Buchholz, Changeur de robinet, jauge de niveau d'huile, Vanne papillon, Absorbeur d'humidité, réducteur de pression, Ventilateur de refroidissement à flux transversal, Thermomètre bimétallique, Isolant en résine époxy, etc..The structure of off circuit tap changer consists of a drum, cage, strip, disque, et coin.1. The drum structure off-circuit tap changer is usually a single-phase structure switch. The static contact column is cylindrical, and the moving contact is circular. A disk spring is installed in the circular moving contact. When the switch is changed, the moving contact is allowed to have displacement relative to the central axis. The displacement of the moving contact relative to the central axis determines the contact pressure. After the exchange, the moving contact is in a stable position. A drum switch is generally used for voltage regulation in the middle of winding.2. Wedge structure off circuit tap changer Wedge structure off circuit tap changer is named because the moving contact in its contact system is wedge-shaped. The static contact is the same as the drum switch, which is also cylindrical. The moving contact is wedge-shaped. The moving contact of the wedge switch is compressed by a cylindrical spring. The contact resistance is relatively stable. The overheating of the contact is less than that of the drum switch.3. Cage structure non-excitation tap changer The cage switch usually has multiple insulation columns, and the upper end and lower end are provided with metal flanges to connect the insulation columns. A fixed contact is installed on the insulating column. The center of the flange is a rotating shaft on which a moving contact is installed. The insulating shaft of the rotary switch can drive the moving contact to rotate to adjust the tapping position. When the voltage is low, the cage switch can be made into a three-phase structure. When the current is high, or the voltage is high, the fixed contact of the cage switch, which is usually made into a single-phase structure, is cylindrical or plate-shaped, the moving contact is clip-shaped, and the contact spring is a cylindrical spiral spring, with stable pressure and reliable contact. The cage switch is suitable for large currents and high voltage. Now, domestic manufacturers can produce 330kV cage switches with rated currents up to 6000A.4. Strip structure off circuit tap changerLe contact fixe de l'interrupteur à bande est installé sur la longue colonne isolante ou la plaque isolante, et le contact mobile se déplace en ligne droite dans la direction de la colonne isolante pour changer la position de prise.5. Disc structure off circuit tap changerThe fixed contact of the disc structure non-excitation switch is installed on the disc-shaped insulating part, and the moving contact rotates in the center of the disc to change the tapping. Disk switch is commonly used for neutral point voltage regulation of Y connection winding, three-phase structure, and the general voltage is not higher than 35kV.

Changeur de prise hors charge dans le transformateur chinois Fabricant头.jpgTap Changer used for Distribution Transformer China Manufacturer图3_副本_副本.jpg

Attributs du produit

Numéro de modèle.WST250/10

MarquePDDN

Fonction du produitAjuster la tension de sortie du transformateur

Tension Applicable10KW~35KV

Courant applicable36UN ~ 250A

Nombre de robinetsMultiple

Forme du produitBande et rond

Type de produitAucune excitation

Plage de prises de régulation de tension±5%

Nombre de phasesSimple/Trois

Position de régulation de pressionPoint neutre, régulation de tension moyenne et fin de ligne

Que ce soit intelligentOui

Lieu d'origineChine

Nom du produitChangeur de prises avec transformateur à huile

Conditionnement & Livraison

Unités de vente PDDN:Pièce/Pièces
PDDN-Taille de paquet unique: 45cm*15cm*15cm
PDDN-Poids brut unique:1.5kilos
Type de colis:Carton PDDN
Exemple d'image:

DEMANDER UN DEVIS

DEMANDER UN DEVIS