Black Technology in Photovoltaic Inverters – Electromagnetic Compatibility Design

Photovoltaic inverters are essential equipment in photovoltaic systems, mainly used to change the direct current generated by photovoltaic modules into alternating current. In addition, inverters also undertake crucial functions such as detecting the operating status of modules, power grids, and cables, communicating with the outside world, and managing system safety. In the photovoltaic industry-standard NB32004-2013, inverters have over 100 strict technical parameters, and each parameter must be qualified to obtain a certificate. By conducting annual spot checks on nine photovoltaic grid-connected inverter products, including protection connection, contact current, power frequency withstand voltage of solid insulation, rated input and output, conversion efficiency, harmonic and waveform distortion, power factor, DC component, and AC output side overvoltage/Undervoltage protection. A brand new inverter, from development to mass production, takes more than two years to come out. In addition to functions such as overvoltage and undervoltage protection, the inverter also has many little-known black technologies, such as leakage current control, heat dissipation design, electromagnetic compatibility, harmonic suppression, efficiency control, etc.

Why do photovoltaic inverters need to be designed for electromagnetic compatibility?

A photovoltaic system consists of photovoltaic modules, brackets, DC cables, inverters, AC cables, lemari distribusi, transformator, etc. The brackets are not charged and naturally do not generate electromagnetic interference. Photovoltaic modules and DC cables contain DC inside, with no change in direction, and can only generate electric fields, not magnetic fields. Although the output transformer is AC power, its frequency is shallow, only 50Hz, and the induced magnetic field is very low.

As a power electronic device, photovoltaic inverters have a high switching frequency. Series inverters usually reach around 20K and have a relatively high current. If no measures are taken, there will be significant electromagnetic interference, which can cause unstable operation. Some instruments or equipment around the inverter may need to be fixed.

Inverter eliminates internal interference

Internal attention should be paid to two electromagnetic interference issues in the inverter: the electromagnetic compatibility of the PCB board and the electromagnetic compatibility of the primary circuit. The commonly used electromagnetic compatibility design methods for PCB boards include selecting a reasonable wire width, minimizing the length of the wire, adopting the correct wiring strategy, and preferably using a grid-like wiring structure with one side horizontal and the other side vertical. The cross holes are connected with metalized holes, and decoupling capacitance is configured. In terms of weak current, the detection circuit control circuit adopts an RC filtering design. In terms of solid electricity, the main circuit methods include using appropriate buffer circuits or soft switching circuits and using stacked busbar technology to reduce distributed capacitors. In terms of software, digital filtering technology can be used.

High-quality Supplier

PDDN Fotoelektron Technology Co., Ltd. berfokus pada penelitian tersebut, perkembangan, dan penerapan teknologi elektronika daya dan dikhususkan untuk memasok transformator berkualitas tinggi kepada pelanggan， thyristor, dan produk listrik lainnya. Perusahaan kami terutama memiliki inverter surya， transformator, pengatur tegangan, lemari distribusi, thyristor， modul， dioda， pemanas, dan perangkat elektronik atau semikonduktor lainnya. Perangkat elektronik dan produk semikonduktor disediakan oleh PDDN Photoelectron Technology Co., Ltd. mempunyai karakteristik efisiensi yang tinggi, keamanan, dan keandalan. Mereka banyak digunakan dalam sistem tenaga, pengendalian industri, manajemen energi, dan bidang lainnya.

Ia menerima pembayaran melalui Kartu Kredit, T/T, Serikat Barat, dan Paypal. PDDN akan mengirimkan barang ke pelanggan di luar negeri melalui FedEx, DHL, melalui laut, atau melalui udara. Silakan tanyakan jika Anda menginginkan kualitas tinggi electronic devices or semiconductor products; kami akan membantu.