Factory S13 Oil Immersed Transformer Factory 200KVA Power Transformer 10kv/0.4

Overview of Factory S13 Oil Immersed Transformer Factory 200KVA Power Transformer 10kv/0.4

An oil-immersed transformer is a type of electrical transformer where the core and windings are submerged in an insulating oil. This oil serves two primary functions: it acts as a highly effective insulator between conductive parts and as a coolant to dissipate heat generated during operation. These transformers are robust, reliable, and highly efficient, making them the standard choice for high-voltage power distribution and transmission networks, typically installed outdoors in substations.

Features of Factory S13 Oil Immersed Transformer Factory 200KVA Power Transformer 10kv/0.4

• Effective Cooling: The insulating oil efficiently absorbs heat from the core and windings and transfers it to the radiator fins, allowing for natural or forced circulation and higher overload capacity.
• Superior Insulation: The oil provides much better dielectric strength than air, allowing for a more compact design for a given voltage rating and protecting against short circuits.
• Robust Construction: Designed for long-term, reliable operation (often 25-30 years) in harsh outdoor environments.
• Overload Capacity: Can handle temporary power overloads better than dry-type transformers due to the thermal mass and cooling properties of the oil.
• Protection System: Equipped with a conservator tank (to allow for oil expansion), breather (to absorb moisture from air), and protective relays (Buchholz relay) for internal fault detection.
• Cost-Effective: Generally more economical for high-power applications compared to dry-type transformers.

Specifications of Factory S13 Oil Immersed Transformer Factory 200KVA Power Transformer 10kv/0.4

This 200KVA oil-immersed transformer from Factory S13 steps down 10kV distribution voltage to a usable 0.4kV for buildings and equipment. It efficiently manages power flow. The core uses high-grade silicon steel laminations. This minimizes energy loss during operation. Copper windings ensure good conductivity and heat dissipation. The whole assembly sits inside a sturdy welded steel tank filled with insulating oil. This oil cools the transformer and protects the internal parts. Cooling happens naturally through radiator fins attached to the tank. Air flows over these fins, taking heat away. This design is reliable and needs little maintenance.

The transformer handles standard 50Hz power systems. Its rated capacity is 200 kilovolt-amperes. The primary voltage connects at 10,000 volts. The secondary side delivers 400 volts. This matches common low-voltage equipment needs. Voltage adjustment taps on the primary winding allow fine-tuning. This compensates for minor supply voltage fluctuations. The unit stays within safe temperature limits during full load. It handles heat well. Its impedance voltage is carefully controlled. This protects against short-circuit faults. The transformer operates quietly. Sound levels are kept low. Noise won’t disturb nearby areas.

The tank protects against weather and corrosion. Its robust construction ensures a long service life. Seals prevent oil leaks and moisture ingress. An oil conservator tank allows for oil expansion and contraction. This keeps the main tank completely filled. A silica gel breather keeps internal air dry. This prevents condensation inside. Safety features include a pressure relief device. This vents excess pressure quickly if needed. An oil level gauge allows easy visual checks. Sampling valves let you test the oil condition. Grounding terminals provide secure earthing points. The transformer meets essential industry standards for safety and performance. It’s built for dependable power distribution.

Applications of Factory S13 Oil Immersed Transformer Factory 200KVA Power Transformer 10kv/0.4

This factory-made S13 oil immersed transformer steps down high voltage electricity. It takes 10,000 volts and changes it to safer 400 volts. The 200KVA power rating suits many industrial needs. Factories rely on this transformer daily. It powers heavy machinery, assembly lines, and lighting systems safely. The oil cooling keeps it running reliably for long hours. This transformer handles the constant demand of manufacturing plants well.

Construction sites use these units too. They provide temporary power for tools, cranes, and site offices. The robust design handles outdoor conditions. It powers essential equipment where grid power is unavailable or unstable. The transformer connects easily to generators or the main grid.

Water treatment plants and pumping stations need dependable power. This 200KVA transformer delivers it. It runs pumps and control systems smoothly. The oil insulation protects against electrical faults. This ensures continuous operation for critical infrastructure.

Farms and agricultural facilities use this transformer. It powers irrigation systems, grain dryers, and processing equipment. The 10kV/0.4kV setup works with rural power lines. It provides the right voltage for farm operations efficiently. The simple design means less maintenance hassle.

Renewable energy projects integrate these transformers. They connect solar farms or small wind turbines to the local grid. The transformer adjusts the voltage for distribution. It handles the variable output from green energy sources reliably. This makes clean power integration practical.

Warehouses and logistics centers depend on steady electricity. This transformer powers sorting systems, refrigeration units, and security. Its oil-immersed construction offers good overload capacity. This is vital during peak operational times. The transformer ensures goods move without power interruption.

Commercial buildings benefit from its installation. It supplies safe low voltage power to shops, offices, and small factories. The S13 design meets modern efficiency standards. It saves energy costs over its long service life. This transformer provides a solid power foundation for diverse applications.

Company Profile

PDDN Photoelectron Technology Co., Ltd. is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality Factory S13 Oil Immersed Transformer Factory 200KVA Power Transformer 10kv/0.4, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of Factory S13 Oil Immersed Transformer Factory 200KVA Power Transformer 10kv/0.4

What exactly is this transformer?
It steps down high voltage electricity. Specifically, it changes 10,000 volts (10kV) to 400 volts (0.4kV). The transformer is filled with special oil for cooling and insulation. Its capacity is 200 kilovolt-amperes (kVA), suitable for substantial power needs.

Where is this 200kVA transformer typically used?
It powers factories, large buildings, and industrial complexes. You see it where machinery needs lots of reliable electricity. It connects directly to the medium-voltage grid (10kV). It then feeds lower voltage power to equipment inside the facility.

What makes this oil-immersed transformer reliable?
The oil inside is crucial. It cools the transformer efficiently. The oil also prevents electrical breakdowns. The core and windings use high-grade steel and copper. These materials minimize energy loss. The robust steel tank protects the internal parts. The design ensures stable, long-term operation.

How difficult is installation?
Installation requires professional electrical engineers. The transformer is heavy and needs proper handling. It must sit on a solid, level foundation. Connections to the high-voltage grid are critical. Safety procedures are mandatory. Local electrical codes must be followed exactly. The factory provides basic installation guidelines. Always hire certified technicians for this work.

What maintenance is needed?
Regular checks are essential. Inspect the oil level often. Check for leaks around the tank and valves. Monitor the oil’s condition; periodic testing is recommended. Clean the exterior radiators to ensure good cooling. Listen for unusual noises. Watch for excessive vibration. Keep records of all inspections and tests. Proper maintenance prevents failures and extends the transformer’s life.