High Efficiency Oil-Immersed Three-Phase Transformer 10KV 8000kVA 10000kVA 12500kVA 16000kVA 20000kVA With 35KV Input Voltage

Overview of High Efficiency Oil-Immersed Three-Phase Transformer 10KV 8000kVA 10000kVA 12500kVA 16000kVA 20000kVA With 35KV Input Voltage

An oil-immersed transformer is a type of electrical transformer where the core and windings are submerged in an insulating oil. This oil serves two primary functions: it acts as a highly effective insulator between conductive parts and as a coolant to dissipate heat generated during operation. These transformers are robust, reliable, and highly efficient, making them the standard choice for high-voltage power distribution and transmission networks, typically installed outdoors in substations.

Features of High Efficiency Oil-Immersed Three-Phase Transformer 10KV 8000kVA 10000kVA 12500kVA 16000kVA 20000kVA With 35KV Input Voltage

• Effective Cooling: The insulating oil efficiently absorbs heat from the core and windings and transfers it to the radiator fins, allowing for natural or forced circulation and higher overload capacity.
• Superior Insulation: The oil provides much better dielectric strength than air, allowing for a more compact design for a given voltage rating and protecting against short circuits.
• Robust Construction: Designed for long-term, reliable operation (often 25-30 years) in harsh outdoor environments.
• Overload Capacity: Can handle temporary power overloads better than dry-type transformers due to the thermal mass and cooling properties of the oil.
• Protection System: Equipped with a conservator tank (to allow for oil expansion), breather (to absorb moisture from air), and protective relays (Buchholz relay) for internal fault detection.
• Cost-Effective: Generally more economical for high-power applications compared to dry-type transformers.

Specifications of High Efficiency Oil-Immersed Three-Phase Transformer 10KV 8000kVA 10000kVA 12500kVA 16000kVA 20000kVA With 35KV Input Voltage

This high performance oil-immersed three-phase transformer steps down 35kV power to 10kV. It manages demanding lots from 8000kVA up to 20000kVA. These systems are built for trusted power circulation in industrial settings and big centers.

Energy savings are a significant emphasis. The design makes use of top-quality grain-oriented silicon steel cores. This material substantially cuts core losses. Low-resistance copper windings decrease load losses. With each other, these features push effectiveness beyond basic requirements. You save substantial operating expense over the transformer’s lengthy life.

The transformer makes use of oil for air conditioning and insulation. Mineral oil distributes naturally or with pumps. Fins or radiators affixed to the tank aid dissipate warmth. This maintains operating temperatures secure. Secure temperatures safeguard the insulation and expand life span. An oil conservator storage tank allows for oil development and tightening.

Durable building ensures longevity. The welded steel container is rigorously leak-tested. It holds up against inner stress and shields against ecological factors. Internal components are firmly secured. This stops movement during shipping or operation. Tight securing additionally decreases noise.

Security and integrity are built-in. Stress alleviation devices safeguard versus internal faults. Oil degree evaluates and temperature level indicators give clear condition surveillance. Winding temperature level monitors supply extra protection for the largest units. These transformers meet international standards like IEC 60076. They do dependably under typical conditions and take care of brief circuits successfully.

Applications of High Efficiency Oil-Immersed Three-Phase Transformer 10KV 8000kVA 10000kVA 12500kVA 16000kVA 20000kVA With 35KV Input Voltage

These high effectiveness oil-immersed three-phase transformers manage large power work. They step down 35,000 volts to a more secure 10,000 volts. Their power rankings are big: 8000kVA, 10000kVA, 12500kVA, 16000kVA, 20000kVA. This makes them vital for numerous requiring situations.

Manufacturing facilities require dependable power. These transformers supply it. They power heavy machinery, production lines, big motors. They take care of the constant high lots commercial websites demand. They are tough sufficient for factory environments.

Power circulation networks count on them too. They sit inside substations. They take the high voltage from transmission lines. They reduce it to 10kV for neighborhood circulation. This voltage feeds smaller sized transformers offering communities or companies. Their effectiveness matters here. It conserves energy and decreases operating costs dramatically gradually.

Large structures utilize them. Think hospitals, universities, large workplace complexes. These places have big power demands. They require robust systems. These transformers handle the main electric service. They feed power throughout the entire center accurately.

Mines and oil areas operate in remote, rough areas. They need reputable power for processing and extraction. These transformers are developed for that. The oil air conditioning works well. It handles warm from continuous hefty use. This ensures secure procedure far from very easy repairs.

The design focuses on low losses. High effectiveness implies less lost energy. Less waste suggests lower electricity bills. It additionally implies less warm produced. The oil cooling system handles this warmth efficiently. This extends the transformer’s life-span. The durable construction protects the core and windings. It ensures lasting dependability under challenging problems. Security functions are integrated. They secure against overloads and faults. Routine maintenance is uncomplicated. This maintains downtime very little.

Company Profile

PDDN Photoelectron Technology Co., Ltd. is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality High Efficiency Oil-Immersed Three-Phase Transformer 10KV 8000kVA 10000kVA 12500kVA 16000kVA 20000kVA With 35KV Input Voltage, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of High Efficiency Oil-Immersed Three-Phase Transformer 10KV 8000kVA 10000kVA 12500kVA 16000kVA 20000kVA With 35KV Input Voltage

Here’s the optimized product description without transitions or complex vocabulary:

High-efficiency oil-immersed three-phase transformers handle industrial power needs. These units convert 35kV input to 10kV output. Common questions follow:

What voltage inputs work? These transformers accept 35kV input voltage. This voltage is standard for many industrial applications. The transformers adjust the input for proper output.

What sizes are available? Units come in 8000kVA, 10000kVA, 12500kVA, 16000kVA, and 20000kVA capacities. These sizes cover typical power requirements. The sizes are standard for industrial use.

How efficient are these transformers? They operate with high efficiency. This efficiency reduces energy waste. The oil immersion design helps achieve this performance. The result is lower operating costs over time.

Why use oil-immersed transformers? Oil immersion provides cooling. Cooling improves transformer longevity. This design handles high loads well. The transformers work reliably in demanding conditions.

What are three-phase transformers used for? They distribute power in industrial settings. Three-phase power is efficient for heavy machinery. These transformers supply stable power for factories. The transformers are essential for large-scale operations. They ensure smooth power transmission across facilities.