Overview of Fiberglass Heat Insulation Sleeving with Silicone Coating for Motors and Transformers

Fiberglass Heat Insulation Sleeving with Silicone Coating for Motors and Transformers is the primary insulation device outside the transformer box, used to ensure the insulation of the transformer winding wires. It consists of multiple parts, including the central insulated capacitor core, external insulated upper and lower porcelain components, etc. According to the voltage level, there are various forms of bushings, such as pure ceramic, oil-filled bushings, and capacitor bushings. During the operation of a transformer, the insulation sleeve through which the winding leads is one of its current-carrying components, which needs to withstand the load current and short-circuit current.

Characteristics of Fiberglass Heat Insulation Sleeving with Silicone Coating for Motors and Transformers

Excellent electrical insulation performance: It can effectively prevent the adverse effects of current on wires, cables, or equipment.

High-temperature resistance: Made of high-temperature resistant materials, it can maintain excellent performance in high-temperature environments.

Corrosion resistance: It can effectively prevent chemical substances from causing corrosion damage to wires, cables, or equipment.

Antiaging performance: Maintain stable performance in long-term use and effectively extend service life.

Good mechanical strength and sealing performance: able to withstand instantaneous overheating in the event of a short circuit, with a small appearance, small weight, good sealing performance, strong versatility, and easy maintenance.”

Specification of Fiberglass Heat Insulation Sleeving with Silicone Coating for Motors and Transformers

This fiberglass heat insulation sleeving with silicone coating protects motors and transformers. It stops heat and electrical problems. The main material is strong fiberglass. This fiberglass handles very high heat. The fiberglass gets a special silicone coating. This coating makes the sleeving much better. It seals the material. This stops moisture and chemicals getting inside. The coating also makes the surface smooth. This helps the sleeving slide on easily over wires or parts. It protects against cuts and scratches too.

The sleeving works in very hot places. It handles temperatures up to 500 degrees Fahrenheit or 260 degrees Celsius. This is important inside motors and transformers. These machines get extremely hot when running. The sleeving keeps the heat inside the wires. This stops heat from escaping to other parts. It helps the equipment run cooler and last longer. It saves energy also.

Electrical safety is critical. This sleeving has high dielectric strength. It prevents electrical shorts. It stops electricity jumping between wires or to the machine frame. This protects people and the equipment itself. The silicone coating helps with this electrical insulation. It adds an extra protective layer.

The sleeving is flexible and light. You can bend it easily around tight corners and complex shapes inside motors or transformers. It doesn’t add much weight. It stays strong under vibration and movement. It resists many oils, fuels, and common chemicals. This prevents damage from leaks or spills. The material won’t easily catch fire either. It meets important safety standards for flame resistance.

People use this sleeving mainly on motor windings and transformer coils. It wraps around the copper wires carrying electricity. It insulates individual wires or bundles of wires. It protects connection points like leads and terminals. It shields other sensitive parts inside the equipment from heat and electrical interference.

Applications of Fiberglass Heat Insulation Sleeving with Silicone Coating for Motors and Transformers

Fiberglass heat insulation sleeving with silicone coating protects motors and transformers well. This material handles high heat. It shields wires and parts inside motors and transformers. This prevents heat damage. Motors get hot running. Transformers create heat too. This sleeving keeps that heat away from sensitive areas. It stops overheating. This helps equipment last longer. It lowers the risk of fire.

Electrical safety matters a lot. This sleeving insulates electrically. It stops electricity jumping where it shouldn’t. This prevents shorts. It protects people working near the equipment. Motors and transformers use high voltage. Good insulation is essential. The silicone coating adds this protection. It blocks electricity flow over the surface.

The sleeving is tough. It resists cuts and scrapes. Motors vibrate constantly. Handling during installation can cause nicks. The fiberglass base is strong. The silicone coating makes it slippery. This helps it slide over parts easily. It also resists tearing. This durability means less replacement. Equipment runs longer without maintenance.

Chemicals are a problem. Oil, fuel, and solvents can damage insulation. This sleeving resists many chemicals. Spills happen in workshops. Leaks occur in engines. The silicone coating keeps these liquids out. It stops the insulation breaking down. This maintains its protective job.

Installing this sleeving is straightforward. It fits over wires and components easily. Mechanics can cut it to the right length quickly. It stays flexible even in cold places. This makes fitting it around tight corners simple. It saves time during repairs or building new units. Workers appreciate products that are easy to use.

Company Profile

PDDN Photoelectron Technology Co., Ltd. is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality Fiberglass Heat Insulation Sleeving with Silicone Coating for Motors and Transformers, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of Fiberglass Heat Insulation Sleeving with Silicone Coating for Motors and Transformers

Here are 5 FAQs about Fiberglass Heat Insulation Sleeving with Silicone Coating for Motors and Transformers:

What is this sleeving? It’s a protective sleeve made from woven fiberglass. The fiberglass gets a silicone rubber coating. This combination shields wires and parts inside motors and transformers from intense heat.

How hot can it get? This sleeving handles very high temperatures. It works reliably up to 500°F (260°C). It protects components from heat damage in demanding electrical equipment.

Why the silicone coating? The silicone adds crucial benefits. It makes the sleeve flexible and easy to install. It seals the fiberglass, stopping moisture, dust, and chemicals from getting inside. This prevents corrosion and electrical problems. The coating also makes the sleeve tougher against abrasion and tearing.

How do you put it on? Installation is simple. Measure the length you need. Cut the sleeving with sharp scissors. Slide the sleeve directly over the wire or component. The silicone coating helps it slide smoothly into place. Ensure the fit is snug but not overly tight.

How do I pick the right size? Choosing the correct inner diameter is vital. Measure the part you need to cover. Pick a sleeve size slightly larger than this measurement. This allows easy sliding. But avoid a size too big. A loose sleeve won’t stay put properly and offers less protection.