Overview of Class H High Temperature Silicone Fireproof Fiberglass Sleeving for Power Transformer Windings

Class H High Temperature Silicone Fireproof Fiberglass Sleeving for Power Transformer Windings is the primary insulation device outside the transformer box, digunakan untuk memastikan isolasi kabel belitan transformator. Ini terdiri dari beberapa bagian, termasuk inti kapasitor berinsulasi pusat, komponen porselen atas dan bawah berinsulasi eksternal, dll.. Menurut tingkat tegangan, ada berbagai macam bentuk bushing, seperti keramik murni, bushing berisi minyak, dan bushing kapasitor. Selama pengoperasian transformator, selongsong insulasi yang dilalui kabel belitan merupakan salah satu komponen pembawa arusnya, yang perlu menahan arus beban dan arus hubung singkat.

Characteristics of Class H High Temperature Silicone Fireproof Fiberglass Sleeving for Power Transformer Windings

Kinerja isolasi listrik yang sangat baik: Ini secara efektif dapat mencegah efek buruk arus pada kabel, kabel, atau peralatan.

Ketahanan suhu tinggi: Terbuat dari bahan tahan suhu tinggi, itu dapat mempertahankan kinerja yang sangat baik di lingkungan bersuhu tinggi.

Ketahanan korosi: Ini dapat secara efektif mencegah zat kimia menyebabkan kerusakan korosi pada kabel, kabel, atau peralatan.

Kinerja antipenuaan: Pertahankan kinerja yang stabil dalam penggunaan jangka panjang dan memperpanjang masa pakai secara efektif.

Kekuatan mekanik dan kinerja penyegelan yang baik: mampu menahan panas berlebih seketika jika terjadi korsleting, dengan penampilan kecil, berat badan kecil, kinerja penyegelan yang baik, fleksibilitas yang kuat, dan perawatan yang mudah.”

Specification of Class H High Temperature Silicone Fireproof Fiberglass Sleeving for Power Transformer Windings

This sleeving protects power transformer windings. It uses fiberglass fabric coated with high-grade silicone rubber. This combination creates a strong, flexible tube. The material meets Class H temperature standards. It reliably handles continuous heat up to 180°C (356°F). Short-term exposure to much higher peaks is possible. This heat resistance is critical for transformer operation.

Fire safety is essential. The sleeving offers excellent fire protection. It resists ignition and burning. It self-extinguishes if exposed to flame. This prevents fires spreading inside the transformer. It also produces very little smoke. Low smoke generation improves safety during incidents.

Electrical insulation is a primary job. The sleeving provides strong dielectric strength. It effectively insulates windings. This prevents electrical shorts and failures. It withstands high voltages encountered in transformers. The insulation remains stable under thermal stress.

Durability matters in harsh transformer environments. The fiberglass core gives the sleeve good mechanical strength. It resists abrasion, robek, and cutting. The silicone coating protects against moisture, minyak, dan bahan kimia. This prevents degradation over time. The sleeve stays flexible across a wide temperature range. Flexibility makes installation easier around windings.

Using this sleeving enhances transformer reliability. It protects windings from heat, fire, and electrical faults. It contributes to longer transformer lifespan. It helps prevent costly downtime and repairs. This product is a practical solution for demanding power applications.

Applications of Class H High Temperature Silicone Fireproof Fiberglass Sleeving for Power Transformer Windings

Power transformers generate intense heat during operation. This heat can damage standard insulation materials over time. Class H high temperature silicone fireproof fiberglass sleeving solves this problem. It protects transformer windings reliably. The sleeving withstands continuous temperatures exceeding 180°C. It handles even higher short-term spikes safely.

Bahan intinya adalah anyaman fiberglass. This gives the sleeve its basic strength and shape. Fiberglass resists heat naturally. A special high-temperature silicone rubber coats the fiberglass braid. This coating bonds tightly to the glass fibers. The silicone layer adds crucial protection. It seals the sleeve against moisture, minyak, dan bahan kimia. It provides excellent electrical insulation properties too. The combination creates a tough, flexible barrier.

Installing this sleeving is straightforward. Workers slide it directly over copper winding conductors. It fits snugly around the wire. The sleeving acts like a protective skin. It shields the wire insulation underneath from the transformer’s extreme internal heat. This prevents the primary insulation from degrading prematurely. It stops insulation breakdown that leads to dangerous short circuits. Preventing shorts avoids unexpected transformer failures and costly downtime.

The sleeving’s fireproof nature is critical. It doesn’t easily catch fire. It doesn’t support flame spread if exposed to an external fire source. This adds an important safety layer within the transformer. It helps contain potential internal faults. Using this sleeving extends the transformer’s operational life significantly. Ini mengurangi kebutuhan pemeliharaan. It cuts down on expensive repairs caused by heat damage. Ini menghemat uang seiring waktu.

Profil Perusahaan

PDDN Fotoelektron Technology Co., Ltd. adalah salah satu perusahaan terkemuka di bidang teknologi elektronika daya dan produk daya, yang terlibat penuh dalam pengembangan inverter surya， transformator, pengatur tegangan, lemari distribusi, thyristor， modul， dioda， pemanas, dan perangkat elektronik atau semikonduktor lainnya. Kami akan berkomitmen untuk menyediakan layanan berkualitas tinggi kepada pengguna, produk yang efisien dan layanan penuh perhatian.

Ia menerima pembayaran melalui Kartu Kredit, T/T, Serikat Barat, dan Paypal. PDDN akan mengirimkan barang ke pelanggan di luar negeri melalui FedEx, DHL, melalui laut, atau melalui udara. If you want high-quality Class H High Temperature Silicone Fireproof Fiberglass Sleeving for Power Transformer Windings, silakan kirimkan pertanyaan kepada kami; kami akan berada di sini untuk membantu Anda.

Metode Pembayaran

L/C, T/T, Serikat Barat, Paypal, Kartu Kredit dll.

Pengiriman

Melalui laut, melalui udara, dengan mengungkapkan, sebagai permintaan pelanggan.

Kondisi Penyimpanan

1) Simpan di lingkungan kering pada suhu kamar.

2) Hindari lembab dan suhu tinggi.

3) Gunakan segera setelah membuka kantong kemasan bagian dalam.

5 FAQs of Class H High Temperature Silicone Fireproof Fiberglass Sleeving for Power Transformer Windings

Berapa suhu yang dapat ditahan oleh selongsong ini?
It handles constant heat up to 180°C (356°F). This matches Class H insulation standards. Short spikes won’t damage it either. The silicone coating keeps the fiberglass core protected. This makes it reliable for hot transformer windings.

Is it really fireproof?
Ya. The fiberglass base material won’t burn. The silicone coating resists flames too. Bersama, mereka menciptakan penghalang yang kuat. This sleeving won’t easily catch fire. It also stops flames spreading if a serious fault happens inside the transformer.

Why use it on transformer windings?
Transformer windings get very hot and carry high voltage. This sleeving protects the wire insulation. It guards against scrapes, percikan api, and heat damage. It also resists electrical shocks. Ini mencegah korsleting. It makes the transformer safer and last longer.

Bagaimana Anda menginstalnya?
You slide it over the wires before assembly. Ini pas. You can also cut it to the exact length needed. The material is flexible but strong. It bends easily around corners without breaking. This makes putting it on transformer coils straightforward.

Ukuran apa yang tersedia?
Many sizes exist to fit different wire thicknesses. Common sizes range from small diameters to large ones. You need the right size for a tight fit. A loose sleeve won’t protect well. A too-tight sleeve is hard to install. Measure your wires first.