Overview of Factory Insulation Fibre Glass Sleeve for Motor Transformer

Factory Insulation Fibre Glass Sleeve for Motor Transformer is the primary insulation device outside the transformer box, digunakan untuk memastikan isolasi kabel belitan transformator. Ini terdiri dari beberapa bagian, termasuk inti kapasitor berinsulasi pusat, komponen porselen atas dan bawah berinsulasi eksternal, dll.. Menurut tingkat tegangan, ada berbagai macam bentuk bushing, seperti keramik murni, bushing berisi minyak, dan bushing kapasitor. Selama pengoperasian transformator, selongsong insulasi yang dilalui kabel belitan merupakan salah satu komponen pembawa arusnya, yang perlu menahan arus beban dan arus hubung singkat.

Characteristics of Factory Insulation Fibre Glass Sleeve for Motor Transformer

Kinerja isolasi listrik yang sangat baik: Ini secara efektif dapat mencegah efek buruk arus pada kabel, kabel, atau peralatan.

Ketahanan suhu tinggi: Terbuat dari bahan tahan suhu tinggi, itu dapat mempertahankan kinerja yang sangat baik di lingkungan bersuhu tinggi.

Ketahanan korosi: Ini dapat secara efektif mencegah zat kimia menyebabkan kerusakan korosi pada kabel, kabel, atau peralatan.

Kinerja antipenuaan: Pertahankan kinerja yang stabil dalam penggunaan jangka panjang dan memperpanjang masa pakai secara efektif.

Kekuatan mekanik dan kinerja penyegelan yang baik: mampu menahan panas berlebih seketika jika terjadi korsleting, dengan penampilan kecil, berat badan kecil, kinerja penyegelan yang baik, fleksibilitas yang kuat, dan perawatan yang mudah.”

Specification of Factory Insulation Fibre Glass Sleeve for Motor Transformer

Our factory insulation fiberglass sleeves protect electric motors and transformers. They are essential parts. These sleeves stop electrical currents from causing short circuits. They also manage heat very well. The sleeves are made from top-quality woven fiberglass. This material is naturally strong against heat and electricity. We treat the fiberglass with special heat-resistant coatings. These coatings make the sleeves even tougher. They also help the sleeves last much longer.

These sleeves handle extremely high temperatures easily. They resist temperatures up to 1200 degrees Fahrenheit. This is 650 derajat Celsius. They perform reliably in hot environments. They keep electrical parts safe. The sleeves are also very flexible. They fit snugly over wires, kabel, and bus bars. This tight fit gives constant insulation protection. The woven design allows some stretch. This makes installation simpler. You can slide them over parts easily.

Our fiberglass sleeves offer excellent electrical insulation. They have high dielectric strength. This prevents electrical arcing and breakdown. They are perfect for insulating motor windings. They work well on transformer leads too. You can use them on generator coils. They suit other high-voltage electrical components. The sleeves resist many chemicals and oils. Mereka tahan api. They do not support burning. This adds safety in case of electrical faults.

We offer sleeves in different diameters and wall thicknesses. Common sizes range from 1/8 inch to over 2 inci. Wall thicknesses vary. Thicker walls give more insulation. Dinding yang lebih tipis menawarkan lebih banyak fleksibilitas. You choose based on voltage needs and space. The sleeves come in standard lengths. Custom lengths are available too. We use continuous fiberglass yarn. This ensures consistent quality. Our sleeves meet international safety standards. They are reliable insulation solutions. They protect valuable electrical equipment.

Applications of Factory Insulation Fibre Glass Sleeve for Motor Transformer

Factory insulation fiber glass sleeves are essential for protecting motors and transformers. They handle high heat. They provide strong electrical insulation. These sleeves are vital in industrial settings. Factories rely on them for safety and performance.

Motors generate significant heat during operation. This heat can damage internal wiring. Fiber glass sleeves cover these wires. They resist temperatures over 1000°F. Ini mencegah kerusakan isolasi. Ini menghentikan arus pendek. Motors run cooler and last longer. Production lines stay operational. Waktu henti berkurang.

Transformers also need this protection. They manage high voltages. Electrical arcing is a constant risk. Fiber glass sleeves insulate winding wires. They keep electrical currents contained. This prevents dangerous sparks and fires. Transformer efficiency improves. Kehilangan energi diminimalkan. The entire electrical system becomes more reliable.

These sleeves are tough. They resist chemicals found in factories. Minyak, pelarut, and acids do not damage them easily. The material is also very flexible. It fits snugly over wires and components. Instalasinya mudah. Perawatannya juga lebih sederhana.

Using fiber glass sleeves saves money. They prevent costly equipment failures. Repairs become less frequent. Replacement parts are needed less often. Energy bills can be lower. Efficient motors and transformers use less power. Factory operations run smoother. Productivity increases.

Profil Perusahaan

PDDN Fotoelektron Technology Co., Ltd. adalah salah satu perusahaan terkemuka di bidang teknologi elektronika daya dan produk daya, yang terlibat penuh dalam pengembangan inverter surya， transformator, pengatur tegangan, lemari distribusi, thyristor， modul， dioda， pemanas, dan perangkat elektronik atau semikonduktor lainnya. Kami akan berkomitmen untuk menyediakan layanan berkualitas tinggi kepada pengguna, produk yang efisien dan layanan penuh perhatian.

Ia menerima pembayaran melalui Kartu Kredit, T/T, Serikat Barat, dan Paypal. PDDN akan mengirimkan barang ke pelanggan di luar negeri melalui FedEx, DHL, melalui laut, atau melalui udara. If you want high-quality Factory Insulation Fibre Glass Sleeve for Motor Transformer, silakan kirimkan pertanyaan kepada kami; kami akan berada di sini untuk membantu Anda.

Metode Pembayaran

L/C, T/T, Serikat Barat, Paypal, Kartu Kredit dll.

Pengiriman

Melalui laut, melalui udara, dengan mengungkapkan, sebagai permintaan pelanggan.

Kondisi Penyimpanan

1) Simpan di lingkungan kering pada suhu kamar.

2) Hindari lembab dan suhu tinggi.

3) Gunakan segera setelah membuka kantong kemasan bagian dalam.

5 FAQs of Factory Insulation Fibre Glass Sleeve for Motor Transformer

What’s the main purpose of a fiberglass sleeve?
It’s mainly for protecting wires and cables. The sleeve shields them from extreme heat. It also guards against sparks and physical damage. This keeps the motor or transformer running safely and reliably.

How hot can these sleeves handle?
They withstand very high temperatures. Many handle over 1000°F (around 540°C). This makes them perfect for hot spots near motors and transformers. They won’t melt or catch fire easily.

Is it hard to put these sleeves on?
TIDAK, installation is usually straightforward. You simply slide the sleeve over the wire or cable. Cut it to the exact length you need. Then secure the ends with tape or ties if necessary. It’s a quick job.

What sizes do fiberglass sleeves come in?
They come in many diameters and lengths. You can find small sizes for thin wires. Larger sizes fit big cables or bundles. Measure your wire or cable bundle first. Pick a sleeve diameter slightly bigger for a snug fit.

Do they resist chemicals?
Ya, fiberglass sleeves resist many chemicals. They handle oils, pelarut, and acids pretty well. This protects the wires inside from corrosion. Check the specific sleeve specs for exact chemical resistance details.