35KV Medium And High Voltage Transformer SCB10 Dry-type Transformer 50/60Hz Electrical Equipment Transformer

Overview of 35KV Medium And High Voltage Transformer SCB10 Dry-type Transformer 50/60Hz Electrical Equipment Transformer

An oil-immersed transformer is a type of electrical transformer where the core and windings are submerged in an insulating oil. This oil serves two primary functions: it acts as a highly effective insulator between conductive parts and as a coolant to dissipate heat generated during operation. These transformers are robust, reliable, and highly efficient, making them the standard choice for high-voltage power distribution and transmission networks, typically installed outdoors in substations.

Features of 35KV Medium And High Voltage Transformer SCB10 Dry-type Transformer 50/60Hz Electrical Equipment Transformer

• Effective Cooling: The insulating oil efficiently absorbs heat from the core and windings and transfers it to the radiator fins, allowing for natural or forced circulation and higher overload capacity.
• Superior Insulation: The oil provides much better dielectric strength than air, allowing for a more compact design for a given voltage rating and protecting against short circuits.
• Robust Construction: Designed for long-term, reliable operation (often 25-30 years) in harsh outdoor environments.
• Overload Capacity: Can handle temporary power overloads better than dry-type transformers due to the thermal mass and cooling properties of the oil.
• Protection System: Equipped with a conservator tank (to allow for oil expansion), breather (to absorb moisture from air), and protective relays (Buchholz relay) for internal fault detection.
• Cost-Effective: Generally more economical for high-power applications compared to dry-type transformers.

Specifications of 35KV Medium And High Voltage Transformer SCB10 Dry-type Transformer 50/60Hz Electrical Equipment Transformer

This 35KV SCB10 dry-type transformer handles medium and high voltage needs. It works reliably at both 50Hz and 60Hz frequencies. The transformer uses cast resin insulation. This design makes it very safe and durable. Fire hazards are significantly reduced. The core uses high-grade silicon steel. This minimizes energy losses during operation. You get better efficiency.

The transformer operates safely within specific temperature limits. Its temperature rise stays low under normal load. This design ensures long service life. Noise levels are also kept low. This is important for installations near people. The transformer meets strict environmental protection standards. It doesn’t release harmful substances.

Installation is straightforward. The unit doesn’t need a special fireproof room. Place it directly in electrical rooms. This saves space and reduces costs. The enclosure offers strong protection. It achieves IP20 or IP23 ratings. This guards against solid objects and water spray. Special designs handle harsh conditions like high humidity or pollution.

Maintenance needs are minimal. The cast resin winding blocks moisture and dust. This prevents insulation degradation over time. Optional temperature sensors monitor winding heat. Fans can be added for extra cooling capacity if needed. The transformer connects easily to various switchgear.

Safety certifications are comprehensive. The product complies with IEC standards. It also meets relevant national requirements. Quality systems like ISO 9001 govern manufacturing. Performance data is clearly specified. This includes impedance voltage, load loss, and no-load loss figures. These details help engineers select the right model. The transformer supports stable power distribution. It works well in industrial plants, commercial buildings, and infrastructure projects.

Applications of 35KV Medium And High Voltage Transformer SCB10 Dry-type Transformer 50/60Hz Electrical Equipment Transformer

This 35KV SCB10 dry-type transformer handles medium and high voltage power safely and efficiently. It works with both 50Hz and 60Hz electrical systems. Its core is wrapped in special epoxy resin. This makes it fire-resistant. It won’t release harmful smoke or gases if it overheats. This transformer is a safe choice for many places.

Factories use it extensively. It steps down voltage for large machines and assembly lines. Its dry design means no messy oil leaks. This keeps factory floors cleaner and safer. It also works reliably in dusty or humid industrial environments.

Big buildings need it too. Office towers, shopping malls, and hospitals rely on its steady power. Its quiet operation prevents noise problems. Placing it near offices or patient rooms is acceptable. The fire safety is crucial for crowded buildings. People feel safer knowing it won’t fuel a fire.

Power plants and substations use it for grid connections. It manages voltage levels effectively. The transformer handles high electrical loads consistently. Its robust construction ensures long service life. This reduces maintenance costs and downtime.

Water treatment plants and pumping stations depend on it. Harsh conditions near chemicals or moisture are no problem. Its sealed design protects internal parts. This guarantees clean water delivery without electrical failures.

Renewable energy sites like solar farms and wind turbine installations use it. It steps up voltage for efficient power transmission to the grid. Its reliability is key in remote locations. Minimal maintenance is a big advantage there. Ports, airports, and transportation hubs also install it. Critical systems like lighting and control centers need dependable power. The SCB10 transformer delivers that dependability. Its safety features protect valuable infrastructure and people. Mines and oil refineries choose it for tough settings. It withstands vibrations and temperature swings well.

Company Profile

PDDN Photoelectron Technology Co., Ltd. is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality 35KV Medium And High Voltage Transformer SCB10 Dry-type Transformer 50/60Hz Electrical Equipment Transformer, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of 35KV Medium And High Voltage Transformer SCB10 Dry-type Transformer 50/60Hz Electrical Equipment Transformer

What is the SCB10 35KV transformer?
This is a dry-type transformer. It handles medium and high voltage electricity, specifically 35,000 volts. It uses epoxy resin to insulate the coils. No oil is needed. It works with both 50Hz and 60Hz power systems. It steps voltage up or down safely.

What makes the SCB10 special?
Its main feature is the cast resin design. The coils are completely sealed in epoxy resin. This protects them from dust, moisture, and chemicals. The transformer is very fire-resistant. It produces little smoke if it overheats. It runs very quietly. It needs less maintenance than oil-filled types. It’s also more environmentally friendly.

Where is this 35KV transformer used?
You find it in places needing safe, reliable power inside buildings. It’s common in factories, power plants, and substations. Hospitals, airports, and large office buildings use it. Mines and ships use it too. Places worried about fire risk or pollution prefer it. It’s good for harsh environments.

Is the SCB10 transformer safe?
Yes, safety is a major advantage. The cast resin doesn’t burn easily. It doesn’t leak dangerous fluids like oil transformers can. It meets strict international safety standards like IEC. It prevents fires spreading. It protects people and equipment nearby. It’s safe for indoor installation without special containment.

How much maintenance does it need?
It needs very little maintenance. The sealed epoxy protects the coils well. You mainly check for visible dust or damage. Ensure cooling vents are clear. Check electrical connections stay tight. Monitor its temperature sometimes. You don’t need to test oil or replace it. This saves time and money over its lifetime.