Well-ing 500kva Industrial Transformer Pad Mounted 220V/380V/440V 50Hz/60Hz Three Phase Electrical Equipment 480V 6kv/35kv

Overview of Well-ing 500kva Industrial Transformer Pad Mounted 220V/380V/440V 50Hz/60Hz Three Phase Electrical Equipment 480V 6kv/35kv

An oil-immersed transformer is a type of electrical transformer where the core and windings are submerged in an insulating oil. This oil serves two primary functions: it acts as a highly effective insulator between conductive parts and as a coolant to dissipate heat generated during operation. These transformers are robust, reliable, and highly efficient, making them the standard choice for high-voltage power distribution and transmission networks, typically installed outdoors in substations.

Features of Well-ing 500kva Industrial Transformer Pad Mounted 220V/380V/440V 50Hz/60Hz Three Phase Electrical Equipment 480V 6kv/35kv

• Effective Cooling: The insulating oil efficiently absorbs heat from the core and windings and transfers it to the radiator fins, allowing for natural or forced circulation and higher overload capacity.
• Superior Insulation: The oil provides much better dielectric strength than air, allowing for a more compact design for a given voltage rating and protecting against short circuits.
• Robust Construction: Designed for long-term, reliable operation (often 25-30 years) in harsh outdoor environments.
• Overload Capacity: Can handle temporary power overloads better than dry-type transformers due to the thermal mass and cooling properties of the oil.
• Protection System: Equipped with a conservator tank (to allow for oil expansion), breather (to absorb moisture from air), and protective relays (Buchholz relay) for internal fault detection.
• Cost-Effective: Generally more economical for high-power applications compared to dry-type transformers.

Specifications of Well-ing 500kva Industrial Transformer Pad Mounted 220V/380V/440V 50Hz/60Hz Three Phase Electrical Equipment 480V 6kv/35kv

This Well-ing transformer is a pad-mounted unit constructed for difficult commercial tasks. It manages 500 kilovolt-amperes (kVA) of power. This ability matches lots of manufacturing facility and huge structure needs. The transformer collaborates with three-phase electric systems. This is conventional for hefty equipment.

It accepts different inbound voltages. You can attach it to 220 volts, 380 volts, or 440 volts. The frequency can be either 50 Hertz or 60 Hertz. This flexibility works worldwide. The transformer steps down this voltage. It supplies a 480-volt output. This voltage is common for numerous industrial electric motors and tools.

The device is designed for greater voltage connections also. It attaches directly to circulation networks. It collaborates with key voltages of 6 kilovolts (kV) or 35 kilovolts (kV). This makes it versatile for different grid hookups. Mounting takes place on a concrete pad outdoors. This layout saves space inside structures. It secures the transformer from weather condition and unintentional contact.

Building and construction focuses on resilience and security. The room is durable steel. It resists corrosion and physical damages. Interior elements make use of top-quality electric steel and copper windings. These materials guarantee efficiency and long life. The transformer consists of required bushings and terminals. Links are safe and simple.

Air conditioning is natural utilizing oil. This method is trustworthy and peaceful. The oil also gives good insulation. Security features are incorporated. Stress relief gadgets and fault signs are standard. These aid prevent troubles and permit quick upkeep.

This transformer powers huge equipment reliably. It runs production lines, processing plants, extracting operations, and big industrial facilities. Its design deals with continual industrial lots. Efficiency is high, lowering energy expenses with time. Reliability is key for operations requiring constant power. Installation follows common practices for pad-mounted systems. Upkeep requirements are common for this transformer kind. It gives stable voltage conversion where you need durable power distribution.

Applications of Well-ing 500kva Industrial Transformer Pad Mounted 220V/380V/440V 50Hz/60Hz Three Phase Electrical Equipment 480V 6kv/35kv

The Well-ing 500kVA pad installed transformer is a challenging tool built for serious commercial work. It deals with the effort of transforming electrical energy degrees securely and dependably. You locate it powering large factories and producing plants. It steps down high voltage power from the energy grid, like 6kV or 35kV, to usable degrees like 480V, 440V, 380V, or 220V. This powers hefty equipment, production lines, and huge electric motors. It keeps points running efficiently without voltage drops.

This transformer is essential for power circulation too. It rests securely on a concrete pad outdoors or inside safeguarded locations. It feeds power to entire areas of a facility, like a warehouse complicated or a handling plant. It ensures secure voltage, either 50Hz or 60Hz, for constant procedure. This protects against damage to delicate three-phase devices.

Renewable energy websites additionally use this transformer. It links solar ranches or wind setups to the major grid. It improves the voltage generated for reliable long-distance transmission. It likewise steps down incoming grid power for the site’s own needs. Its robust building and construction takes care of exterior conditions.

Huge construction jobs rely upon it. It gives the major source of power for large sites before long-term infrastructure is ready. It powers cranes, lifts, welding terminals, and short-lived offices. Its pad-mounted layout makes setup simple. It delivers the essential power degrees reliably.

The transformer shields equipment. It separates delicate machinery from grid changes and surges. It ensures electric motors begin appropriately and run without overheating. Its layout concentrates on safety and security and preventing electrical mistakes. This minimizes downtime and upkeep costs. It’s a core part for demanding commercial power systems.

Company Profile

PDDN Photoelectron Technology Co., Ltd. is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality Well-ing 500kva Industrial Transformer Pad Mounted 220V/380V/440V 50Hz/60Hz Three Phase Electrical Equipment 480V 6kv/35kv, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of Well-ing 500kva Industrial Transformer Pad Mounted 220V/380V/440V 50Hz/60Hz Three Phase Electrical Equipment 480V 6kv/35kv

Well-ing 500kva Industrial Transformer FAQs

What voltages does this transformer handle?
This pad-mounted transformer works with many voltages. It takes input power at 480V, 6kV, or 35kV. It outputs power at 220V, 380V, or 440V. This flexibility suits different industrial needs. It handles both 50Hz and 60Hz power systems.

How is this transformer installed?
You put it directly on a strong concrete pad outside. This is the “pad-mounted” design. The pad must be level and solid. It supports the transformer’s weight safely. Correct grounding is essential. Follow local electrical codes strictly.

Does the transformer need special cooling?
Yes, it uses oil for cooling and insulation. The oil circulates naturally inside. This is called ONAN cooling. The tank has fins or radiators. These help release heat into the air. Keep the area around it clear. Good airflow prevents overheating.

Is this transformer safe and certified?
Yes, safety is critical. It meets IEC standards for design and testing. It has a strong steel tank. This protects the internal parts. The enclosure has a good IP rating. This keeps out dust and water. It ensures safe operation outdoors.

What maintenance is needed?
Regular checks are important. Look for oil leaks. Check the oil level often. Watch the oil temperature gauge. Listen for unusual noises. Test the grounding connections yearly. Have a professional inspect it periodically. Proper maintenance extends its life.