Fournisseur de composants électroniques | Transformateurs, Inducteurs, Onduleurs
PARAMÈTRES DU PRODUIT
Description
Changeur de prises hors excitation 9 tap 33kv 63A
$14-30 /Pièce/Pièces
| Type de paiement: | L/C,T/T,D/P,D/A,Paypal,Paiement de Petit Montant,Western union,D/A |
| Incoterms: | GOUSSET,CFR,CIF,EXW,SAF,FCA,CPT,CIP,DEQ,DDP,DDU,Livraison express,DAF,DES |
| PDDN min.. Commande: | 100 Pièce/Pièces |
| PDNanportation: | Océan,Atterrir,Air,Exprimer,Exprimer |
Option:
63A/10KV
125A/10KV
250A/10KV
400A/10KV
63A/35KV
125A/35KV
250A/35KV
Échantillon:
$20.00 /Pièce/Pièces, 1 Pièce/Pièces (Max.. Commande)
Acheter un échantillon
Description du produitLuoyang Datang EnergyPhotoelectron s'engage dans le R&D, fabrication, et vente de divers supports, haut, et transformateurs basse tension et accessoires de transformateur. Les accessoires du transformateur comprennent principalement le relais Buchholz, Changeur de robinet, jauge de niveau d'huile, Vanne papillon, Absorbeur d'humidité, réducteur de pression, Ventilateur de refroidissement à flux transversal, Thermomètre bimétallique, Isolant en résine époxy, etc..The structure of off circuit tap changer consists of a drum, cage, strip, disque, et coin.1. The drum structure off-circuit tap changer is usually a single-phase structure switch. The static contact column is cylindrical, and the moving contact is circular. A disk spring is installed in the circular moving contact. When the switch is changed, the moving contact is allowed to have displacement relative to the central axis. The displacement of the moving contact relative to the central axis determines the contact pressure. After the exchange, the moving contact is in a stable position. A drum switch is generally used for voltage regulation in the middle of winding.2. Wedge structure off circuit tap changer Wedge structure off circuit tap changer is named because the moving contact in its contact system is wedge-shaped. The static contact is the same as the drum switch, which is also cylindrical. The moving contact is wedge-shaped. The moving contact of the wedge switch is compressed by a cylindrical spring. The contact resistance is relatively stable. The overheating of the contact is less than that of the drum switch.3. Cage structure non-excitation tap changer The cage switch usually has multiple insulation columns, and the upper end and lower end are provided with metal flanges to connect the insulation columns. A fixed contact is installed on the insulating column. The center of the flange is a rotating shaft on which a moving contact is installed. The insulating shaft of the rotary switch can drive the moving contact to rotate to adjust the tapping position. When the voltage is low, the cage switch can be made into a three-phase structure. When the current is high, or the voltage is high, the fixed contact of the cage switch, which is usually made into a single-phase structure, is cylindrical or plate-shaped, the moving contact is clip-shaped, and the contact spring is a cylindrical spiral spring, with stable pressure and reliable contact. The cage switch is suitable for large currents and high voltage. Now, domestic manufacturers can produce 330kV cage switches with rated currents up to 6000A.4. Strip structure off circuit tap changerLe contact fixe de l'interrupteur à bande est installé sur la longue colonne isolante ou la plaque isolante, et le contact mobile se déplace en ligne droite dans la direction de la colonne isolante pour changer la position de prise.5. Disc structure off circuit tap changerThe fixed contact of the disc structure non-excitation switch is installed on the disc-shaped insulating part, and the moving contact rotates in the center of the disc to change the tapping. Disk switch is commonly used for neutral point voltage regulation of Y connection winding, three-phase structure, and the general voltage is not higher than 35kV.

Attributs du produit
Numéro de modèle.: WST/63A/11KV
Marque: PDDN
Fonction du produit: Ajuster la tension de sortie du transformateur
Tension Applicable: 10KW~35KV
Courant applicable: 36UN ~ 250A
Nombre de robinets: Multiple
Forme du produit: Bande et rond
Type de produit: Aucune excitation
Plage de prises de régulation de tension: ±5%
Nombre de phases: Simple/Trois
Position de régulation de pression: Point neutre, régulation de tension moyenne et fin de ligne
Que ce soit intelligent: Oui
Lieu d'origine: Chine
Nom du produit: Changeur de prises avec transformateur à huile
Conditionnement & Livraison
| Unités de vente PDDN | : | Pièce/Pièces |
| PDDN-Taille de paquet unique | : | 45cm*15cm*15cm |
| PDDN-Poids brut unique | : | 1.5kilos |
| Type de colis | : | Carton PDDN |
| Exemple d'image | : |
|
DEMANDER UN DEVIS
PRODUITS CONNEXES

Bague d'isolateur en porcelaine de transformateur, bague en laiton de transformateur basse tension haute tension, bague en porcelaine

Zhuhai Shengchang Electronics Co Ltd Power Supply Led Driver 24v 12v Transformer 96w Triac Dimming Lighting Accessories

Connecteurs de joint de connexion de tête de colonne de transformateur, Terminaux & Accessoires Terminal PCB Connecteur Poteau Électrique Pince

Corrosion Resistant Bolts and Nuts for the Dry Transformer Supports.
Chine Changement de robinet de type bande sans excitation Fabricants




