Chine Ventilateur de refroidissement à transformateur sec série soufflante supérieure GFD Chine Fabricant

PARAMÈTRES DU PRODUIT

Description
DEMANDER UN DEVIS

Description

Top blowing series dry transformer cooling fan GFD

$35-66 /Pièce/Pièces

Type de paiement:L/C,T/T,D/P,D/A,Paypal,Paiement de Petit Montant,Western union,D/A
Incoterms:GOUSSET,CFR,CIF,EXW,SAF,FCA,CPT,CIP,DEQ,DDP,DDU,Livraison express
PDDN min.. Commande:10 Pièce/Pièces
PDNanportation:Océan,Atterrir,Air

Option:

470mm

560mm

950mm

1200mm

1000mm

870mm

520mm


Échantillon:

$50.00 /Pièce/Pièces, 1 Pièce/Pièces (Max.. Commande)
Acheter un échantillon

Description du produit

Our company is mainly engaged in the processing, fabrication, et vente d'accessoires pour transformateurs, Relais Buchholz, Changeur de robinet, jauges de niveau d'huile, Vanne papillon, Absorbeur d'humidité, Soupape de surpression, Cross Flow Cooling Fans, Thermomètre bimétallique, Isolant en résine époxy, et autres accessoires industriels.

Dry Type Transformer fan refers to the device used for transformer cooling. It is designed and produced in strict accordance with JB/T8971-1999 Crossflow Cooling Fans for Dry-type Transformers. The iron core of the motor stator and rotor is made of high-quality cold-rolled silicon steel sheet, Low noise bearing. The impeller adopts aluminum alloy surface electrophoresis treatment and then fine dynamic balance adjustment. The left and right end plates are made of stainless steel by stamping, and the air inlet plate, air outlet plate, and air guide plate are made of aluminum alloy profiles by buckle combination. The fan has a reasonable structure, beautiful appearance, large air volume, faible bruit, faible élévation de température, longue durée de vie, stable operation, convenient installation, etc..

working principle

When the cooling fan is used for the dry-type transformer, it is placed on both sides of the lower part of the transformer coil to blow the cold air directly into the high and low-voltage cooling air ducts of the transformer coil, with a noticeable heat dissipation effect, which can ensure the regular operation of the transformer and extend its service life. (The functions such as fan startup and shutdown, transformer overtemperature alarm, and overtemperature trip are provided by the temperature control device).

Model description

Par exemple, the fan model is GFDD470-120A, which means that the working voltage is single-phase 220V, the total length of the fan is 470mm, and the impeller diameter is 120mm. The top-blowing dry-type transformer with the motor installed on the right side uses the crossflow cooling fan.

Cooling mode

There are two types of cooling methods for dry-type transformers: forced air cooling (DE) and natural air cooling (UN).In a natural air-cooled environment, transformers can operate continuously for a long time at a lower capacity.With forced air cooling, the transformer’s output capacity can be increased by 50%. It applies to intermittent overload or emergency overload operations. Due to the significant increase of load loss and impedance voltage during overload, it is in a noneconomic operation state, so it should not be in a long-term continuous overload operation.

Dry Type Distribution Cooling Fan

Présentation de l'entrepriseLuoyang Datang EnergyPhotoelectron est un fabricant de divers produits de support d'alimentation haute et basse tension. Les accessoires du transformateur comprennent un changeur de prises., soupape de surpression, thermomètre, absorbeur d'humidité, relais à gaz, jauge de niveau d'huile, vanne papillon, ventilateur à flux transversal, etc. L'équipement de distribution d'énergie haute tension comprend des bagues d'isolation haute tension et basse tension, câbles, sectionneurs, disjoncteurs à vide, isolateurs haute tension, isolation basse tension, isolateurs en céramique, etc. Depuis sa création, l'entreprise a toujours été guidée par la science et la technologie, soutenu par une technologie solide, technologie de pointe étrangère activement introduite, et constamment amélioré et amélioré ses produits. Après des années de gestion professionnelle, les produits se vendent bien dans tout le pays et sont exportés au Bangladesh, Birmanie, Inde, Russie, Indonésie, Thaïlande, et d'autres pays d'Asie du Sud-Est et d'Afrique. Bienvenue pour visiter, enquêter, et négocier.

Attributs du produit

Numéro de modèle.GFD

MarquePDDN

Nom du produitVentilateur de refroidissement à flux transversal

Product FunctionsReduce the temperature of dry-type transformer

Electric Current0.3A~0.8A

Tension220V/380V

Pouvoir30W~80W

Speed1400min

Noise50DBA~70DBA

Total Length365mm~1200mm

Impeller Diameter90mm~150mm

Nombre de phasesTrois

Conditionnement & Livraison

Unités de vente PDDN:Pièce/Pièces
PDDN-Taille de paquet unique: 40cm*18cm*18cm
PDDN-Poids brut unique:3kilos
Type de colis:PDDN-Boîte en bois
Exemple d'image:

DEMANDER UN DEVIS

DEMANDER UN DEVIS