Isolatie Gevlochten kous Glasvezelhuls Isolatiemateriaal voor elektrische transformator en elektrische motor Glasvezel

PRODUCTPARAMETERS

Beschrijving
VRAAG EEN OFFERTE AAN

Beschrijving

Overview of Insulation Braided Sleeving Fiberglass Sleeve Electrical transformer and electric motor insulation material Fiberglass

Insulation Braided Sleeving Fiberglass Sleeve Electrical transformer and electric motor insulation material Fiberglass is the primary insulation device outside the transformer box, gebruikt om de isolatie van de wikkeldraden van de transformator te garanderen. Het bestaat uit meerdere delen, inclusief de centraal geïsoleerde condensatorkern, extern geïsoleerde bovenste en onderste porseleinen componenten, enz. Volgens het spanningsniveau, er zijn verschillende vormen van bussen, zoals puur keramiek, met olie gevulde bussen, en condensatorbussen. Tijdens de werking van een transformator, de isolatiehuls waardoor de wikkeling loopt, is een van de stroomvoerende componenten, die bestand moet zijn tegen de belastingsstroom en kortsluitstroom.

Characteristics of Insulation Braided Sleeving Fiberglass Sleeve Electrical transformer and electric motor insulation material Fiberglass

Uitstekende elektrische isolatieprestaties: Het kan de nadelige effecten van stroom op draden effectief voorkomen, kabels, of uitrusting.

Bestand tegen hoge temperaturen: Gemaakt van hittebestendige materialen, het kan uitstekende prestaties behouden in omgevingen met hoge temperaturen.

Corrosiebestendigheid: Het kan effectief voorkomen dat chemische stoffen corrosieschade aan draden veroorzaken, kabels, of uitrusting.

Anti-verouderingsprestaties: Behoud stabiele prestaties bij langdurig gebruik en verleng de levensduur effectief.

Goede mechanische sterkte en afdichtingsprestaties: bestand tegen onmiddellijke oververhitting in geval van kortsluiting, met een kleine uitstraling, klein gewicht, goede afdichtingsprestaties, sterke veelzijdigheid, en eenvoudig onderhoud.”

Specification of Insulation Braided Sleeving Fiberglass Sleeve Electrical transformer and electric motor insulation material Fiberglass

This fiberglass braided sleeving protects wires and cables. It is made from woven fiberglass yarns. The sleeve slides easily over bundles. It fits tightly around components. Fiberglass handles very high heat. It withstands temperatures over 1000 graden Fahrenheit. This heat resistance is essential near motors and transformers. These machines get extremely hot during operation.

Het materiaal zorgt voor een uitstekende elektrische isolatie. It prevents short circuits and electrical leaks. This safety is critical inside electrical equipment. The braided design adds physical strength. It protects wires from abrasion, bezuinigingen, and general wear. Moving parts inside machinery cause constant friction. The sleeve acts like a tough shield. It stops wires from rubbing against sharp edges or hot surfaces.

Fiberglass sleeving stays flexible. It bends easily around corners and tight spaces. Dit maakt de installatie eenvoudig. You can cut it to the exact length needed. The open weave structure allows some airflow. Heat can escape better this way. Yet the weave remains tight enough to block contaminants. Stof, vuil, and moisture stay out. This keeps connections cleaner and safer longer.

Its main use is insulating windings in transformers and electric motors. Windings are the coiled copper wires generating magnetic fields. They need protection from heat and electrical stress. This sleeving wraps directly around those windings. It also protects wiring harnesses and individual cables inside these machines. You find it in power generation equipment and industrial controls too. It suits any application needing heat protection and electrical safety. The material is naturally flame retardant. It does not easily catch fire or support burning. Dit voegt nog een veiligheidslaag toe. Its color is usually white or off-white. This helps with visibility during inspections. The sleeving is lightweight and does not add much bulk.

Applications of Insulation Braided Sleeving Fiberglass Sleeve Electrical transformer and electric motor insulation material Fiberglass

Insulation braided sleeving made from fiberglass protects electrical parts. This woven tube shields wires and components. Het kan goed tegen hoge temperaturen. Temperatures up to 1000°F won’t damage it. This heat resistance is crucial near hot spots. Electric motors and transformers get very hot inside. The sleeving keeps insulation safe. It also blocks electrical current. This prevents shorts and shocks. Transformers use lots of oil and coolant. The fiberglass braid resists these liquids. It doesn’t soak them up or break down. Oil spills or leaks won’t ruin it. Abrasion is another big problem. Wires rub against metal frames or other parts. The tough braided sleeve takes this wear. It stops wires from getting scratched or cut. This keeps the electrical system reliable. Dust and dirt cause issues too. They can clog moving parts or create sparks. The tight weave of the sleeving keeps contaminants out. Electric motors have spinning shafts. Generators vibrate constantly. The flexible fiberglass sleeve moves with these parts. It doesn’t crack or split under stress. Installatie is eenvoudig. You just slide the sleeving over wires or cables. It fits snugly around odd shapes and bundles. Technicians can route wires easily through panels. The material is naturally flame retardant. Het zal niet gemakkelijk vlam vatten. This adds safety in case of electrical faults. Factories use it widely on assembly lines. Repair shops rely on it for maintenance jobs. It protects wiring in control panels and switchgear. The fiberglass construction provides strong dielectric insulation. This ensures components stay isolated. Long-term performance is key. The sleeving lasts for years without degrading. It withstands harsh industrial settings.

Bedrijfsprofiel

PDDN Foto-elektron Technologie Co., Ltd. is een van de toonaangevende ondernemingen op het gebied van vermogenselektronicatechnologie en energieproducten, dat volledig betrokken is bij de ontwikkeling van omvormers voor zonne-energie, transformatoren, spanningsregelaars, verdeelkasten, thyristoren, modules, diodes, verwarmers, en andere elektronische apparaten of halfgeleiders. We zullen ons inzetten om gebruikers hoogwaardige kwaliteit te bieden, efficiënte producten en attente service.

Het accepteert betaling via creditcard, T/T, Westelijke Unie, en PayPal. PDDN verzendt de goederen via FedEx naar klanten in het buitenland, DHL, over zee, of door de lucht. If you want high-quality Insulation Braided Sleeving Fiberglass Sleeve Electrical transformer and electric motor insulation material Fiberglass, Stuur ons alstublieft vragen; wij zullen hier zijn om u te helpen.


Betaalmethoden

L/C, T/T, Western Unie, Paypal, Creditcard enz.


Verzending

Over zee, door de lucht, per expresse, zoals klanten vragen.


Opslagomstandigheden

1) Bewaren in een droge omgeving bij kamertemperatuur.

2) Vermijd vocht en hoge temperaturen.

3) Gebruik onmiddellijk na het openen van de binnenverpakking.

5 FAQs of Insulation Braided Sleeving Fiberglass Sleeve Electrical transformer and electric motor insulation material Fiberglass

People often ask how hot fiberglass sleeving can get. This material handles temperatures up to 1000°F continuously. It won’t melt or catch fire easily. This makes it safe near hot transformers and motors.

Voltage protection is another common question. Fiberglass sleeving provides good electrical insulation. It prevents shorts and sparks. The exact voltage rating depends on the sleeve thickness and how it’s used. Always check the specs for your specific job.

Many wonder if the sleeve is flexible. Ja, it bends easily around wires and tight spaces. You can push it over connectors or windings without trouble. This flexibility helps during installation and repairs.

People ask if chemicals damage it. Fiberglass sleeving resists oils, zuren, en oplosmiddelen goed. It won’t break down quickly from common fluids. This resistance keeps wires protected longer in tough environments.

De installatie is eenvoudig. Cut the sleeving to the length you need. Slide it over the wires or components you want to protect. You can secure the ends with heat shrink tubing or special tape.

VRAAG EEN OFFERTE AAN

VRAAG EEN OFFERTE AAN