33KV 415V 500KVA Trefaset padmontert transformator

Overview of 33KV 415V 500KVA Three Phase Pad Mounted Transformer

33KV 415V 500KVA Three Phase Pad Mounted Transformer is an enclosed, bakkenivå elektrisk distribusjonstransformator som vanligvis brukes i undergrunnen (og) kraftsystemer. Den trapper ned primær høyspentelektrisitet (f.eks., 15kV eller 25kV) til en lavere sekundærspenning (f.eks., 120/240V eller 480V) for trygg distribusjon til boligområder, næringsbygg, og industriparker. Den er robust, låsbart stålkabinett gjør det trygt for offentlige områder.

Features of 33KV 415V 500KVA Three Phase Pad Mounted Transformer

Innkapsling på bakkenivå: A låst, manipulasjonssikker, værbestandig stålskap som beskytter de interne komponentene og sikrer offentlig sikkerhet.

Underjordiske kabeltilkoblinger: Designet for enkel tilkobling til underjordisk primær (høy spenning) og sekundær (lavspent) kabler via rom med innebygde gjennomføringer.

Oppdeling: Skille, isolerte rom for høyspennings- og lavspentkomponenter, øke sikkerheten under vedlikehold.

Ventilasjon: Designet med lameller eller andre ventilasjonssystemer for å tillate riktig varmeavledning fra transformatorkjernen og spolene.

Løftekroker: Integrerte løfteører for enkel og sikker montering og utskifting med kran eller talje.

Inngrepssikker maskinvare: Låsbare dører med spesialbolter for å hindre uautorisert tilgang.

Fusede brytere: Inkluderer ofte sikringsbrytere for kretsbeskyttelse og sikker isolasjon.

Pad Foundation: Installert på en betongpute (“putemontert”) å gi en stall, nivå base.

Specifications of 33KV 415V 500KVA Three Phase Pad Mounted Transformer

This transformer is a three-phase pad-mounted unit. Den trapper ned spenningen fra 33,000 volt til 415 volt. Its rated capacity is 500 kilovolt-ampere. This unit suits outdoor installations on concrete pads. It powers commercial buildings or industrial sites reliably.

The primary voltage connects to the high-voltage grid at 33kV. The secondary voltage provides 415V for local distribution. This matches common low-voltage equipment needs. The transformer handles continuous 500kVA loads efficiently. It manages peak demands safely.

The transformer uses mineral oil for cooling and insulation. This oil circulates naturally. The tank is robust steel, welded for strength. It resists weather and corrosion well. The unit features external cooling fins. These fins increase surface area. De hjelper til med å spre varmen effektivt.

Primary bushings are on the high-voltage side. Secondary bushings are on the low-voltage side. These bushings are durable porcelain. They provide secure cable termination points. The transformer includes tap changers. These changers adjust the output voltage slightly. They compensate for varying input voltage levels. Adjustment is usually off-circuit.

Kjernen bruker høyverdig kornorientert silisiumstål. Dette stålet minimerer energitap. Viklinger er av kobber eller aluminium. They are designed for low impedance. Low impedance helps control voltage drop under load. Transformatoren møter IEC 60076 standarder. It complies with relevant national safety rules.

Protective devices are included. A pressure relief valve vents excess internal pressure. An oil level gauge shows the insulating oil volume. A drain valve allows oil sampling or replacement. Lifting lugs are standard for safe handling. The unit is designed for low noise operation. This minimizes disturbance near buildings.

The transformer offers reliable service. It provides stable voltage transformation. Its pad-mounted design saves space. Installasjonen er grei. Kravene til vedlikehold er minimale. This transformer delivers power efficiently for years.

Applications of 33KV 415V 500KVA Three Phase Pad Mounted Transformer

This 33KV/415V 500KVA three phase pad mounted transformer delivers reliable power where you need it. It steps down high 33,000 volt electricity to a usable 415 volt. This makes it perfect for many demanding situations.

Factories and big industrial plants use it constantly. Den driver tungt maskineri, store motorer, and entire production lines without interruption. Its robust pad-mounted design handles tough environments well. It sits securely outside on a concrete pad. This saves valuable indoor space in crowded facilities.

Kjøpesentre, sykehus, and office blocks also rely on it. These places need steady power for lights, heiser, klimaanlegg, and essential equipment. The transformer feeds power directly to the building’s main distribution panel. Its compact outdoor installation is a major advantage in busy areas.

Renewable energy projects find it essential too. It connects solar farms or wind turbines to the main grid. The transformer adjusts the voltage to match the grid’s requirements. Its pad-mounted style simplifies installation in open fields.

Water treatment plants and pumping stations depend on its steady performance. It ensures critical infrastructure keeps running smoothly. The transformer’s enclosed tank protects the internal parts from weather and accidental contact.

Remote locations benefit greatly. Gruver, quarries, or new housing developments need power fast. This transformer provides a ready solution. Its self-contained design means quick setup on a simple pad. Minimal site preparation is needed. Maintenance is straightforward for technicians.

The tough steel tank shields the core and windings. It resists corrosion and physical damage. The transformer includes necessary bushings, taps, og beskyttelsesanordninger. It meets strict safety and performance standards. Det leverer 500 kilovolt-amperes consistently. This transformer is a workhorse for medium voltage distribution. It brings high voltage power down to the level everyday equipment uses.

Bedriftsprofil

PDDN Photoelectron Technology Co., Ltd. er en av de ledende foretakene innen kraftelektronikkteknologi og kraftprodukter, som er fullt involvert i utviklingen av solcelle-omformere， transformatorer, spenningsregulatorer, distribusjonsskap, tyristorer， moduler， dioder， varmeovner, og andre elektroniske enheter eller halvledere. Vi vil være forpliktet til å gi brukerne høy kvalitet, effektive produkter og hensynsfull service.

Den aksepterer betaling med kredittkort, T/T, West Union, og Paypal. PDDN vil sende varene til kunder i utlandet gjennom FedEx, DHL, til sjøs, eller med fly. If you want high-quality 33KV 415V 500KVA Three Phase Pad Mounted Transformer , vennligst send oss ​​forespørsler; vi vil være her for å hjelpe deg.

Betalingsmetoder

L/C, T/T, Western Union, Paypal, Kredittkort etc.

Forsendelse

Ved sjøen, med fly, ved ekspress, som kundene ber om.

Oppbevaringsbetingelser

1) Oppbevares i et tørt miljø ved romtemperatur.

2) Unngå fuktighet og høy temperatur.

3) Brukes umiddelbart etter at den indre pakningsposen er åpnet.

5 FAQs of 33KV 415V 500KVA Three Phase Pad Mounted Transformer

Here are five common questions about the 33KV/415V 500KVA Three Phase Pad Mounted Transformer:

Hva gjør denne transformatoren?
Den trapper ned høyspent elektrisitet. Det tar 33,000 volt (33KV) from the power lines. Det konverterer dette ned til 415 volt (415V). This lower voltage is safe for factories, store bygninger, or housing areas. Kapasiteten er 500 kilo-volt-amperes (500KVA). This handles significant power demand.

Hvor er den installert?
Pad-mounted means it sits on a concrete slab on the ground. You install it outdoors. It needs a sturdy, nivå betongpute. This is simpler than pole-mounted transformers. No poles are needed. The pad keeps it secure and accessible.

Er det trygt utendørs?
Ja, the transformer is inside a locked metal enclosure. This tough metal box protects the internal parts. It keeps people out. It protects against weather like rain or snow. Tampering is difficult. Kun kvalifisert personell skal åpne den.

Hvilket vedlikehold som kreves?
Regelmessige kontroller er viktig. Trained technicians inspect the oil level and condition. They check connections for tightness. De ser etter lekkasjer eller skader. They clean the enclosure exterior. Oil testing might be needed periodically. Følg produsentens tidsplan strengt.

Who uses this specific model?
It’s for medium-power needs. Factories needing 415V three-phase power use it. Large commercial complexes use it. Housing developments needing a local substation use it. Any project requiring reliable 33KV to 415V conversion at the 500KVA level uses it.