Oljetransformator Oljenivåmålinger Kina Produsent

Oil Transformer Oil level measurements

$10-200 /Stykke/Stykker

Alternativ:

UHZ-02

BSW-70

YZ-70

YZF1

YZF2

YZ-70

Prøve:

$20.00 /Stykke/Stykker, 1 Stykke/Stykker (Maks. Bestille)
Kjøp prøve

Produktbeskrivelse

Luoyang Datang energifotoelektron. The company deals in the R&D, produksjon, og salg av ulike medier, høy, and Voltage Transformers and Transformer Accessories. Transformatortilbehøret inkluderer hovedsakelig Buchholz Relay, Trykk på Changer, oljenivåmåler, Butterflyventil, Fuktighetsabsorberende, trykkreduksjonsventil, Cross Flow kjølevifte, Bimetall termometer, Epoksyharpiksisolator, osv. Nye og gamle kunder er velkomne til å kjøpe og tilpasse.

The basic structure of oil level gauge

The Pointer Oil Level Gauge (from now on referred to as the oil level gauge) applies to the oil level display of the Oil Immersed Transformer oil conservator and on-load tap changer oil conservator as well as the alarm of the lowest and highest limit oil level.

The oil level gauge is mainly composed of the display part composed of a pointer and dial, the alarm part consisting of the magnet (or cam) and switch, and the transmission part consisting of a reversing and variable speed gear set, swing rod, and float ball.

Installation of oil-level juice

An oil-level gauge with a floating ball-shaped swing rod should be installed in the center of the end cover of the oil conservator, and the swing rod should swing radially. Other oil level gauges with floating ball-type swing rods should be installed at the lowest oil level in the oil conservator. The telescopic rod-type oil level gauge for the diaphragm oil conservator shall be installed at the highest oil level of the oil conservator. During the installation of the oil level gauge, it must be ensured that the movable space of the swing rod and the floating ball is not interfered with by any structure.

Inspection before installation of oil level gauge

Before installation, check whether the oil level gauge is damaged and rusted during storage and transportation, and install it after treatment.

Before installing the oil level gauge, gently and slowly pull the swing rod to rotate flexibly and reliably and signal at the extreme position.

Before installing the oil level gauge, check whether the lead cable, outlet terminal, and signal switch are well insulated.

Maintenance of oil level gauge

The oil level gauge shall be checked once a year during operation. Check whether the lead wire and switch are well insulated and whether the sealing gasket needs to be replaced.

FAQ

1. Er du et handelsselskap eller en produsent? Vi er et selskap som integrerer produksjon og markedsføring, industri og handel! 2. Hva slags jordingsmateriale produserer du? Inkludert Epoksyharpiksisolatorer, Strømkabler, høyspenningsskillere, Strømfordelingsskap, Oljenedsenkede transformatorer, tørr type transformatorer, Transformatortilbehør, osv. 3. Er tilpassede materialer tilgjengelig? Ja, oppgi spesifikasjonene du trenger. 4. Godtar du OEM-tjenester? ja! 5. Hva er leveringstiden din? Vanligvis 20-25 dager, vennligst bekreft med oss ​​før du bestiller! 6. Hva er betaling Trems? Generelt, 50% er innskuddet og 50% er før konnossementet sendes ved bankoverføring. 7. Hvordan pakke produktet? Vanligvis, i et stålbrett. Vi vil gjøre det i henhold til kundene’ krav. 8. Hva er lasteporten tilgjengelig for deg? Vanligvis Ningbo Port eller Shanghai Port.

Produktattributter

Modellnr.: YZF3-250,YZF2-200,YZS3-200

Merke: PDDN

Garantiperiode: 3 år

Sertifisering: Csa, Pcoc, Nå, Ja, Scoc, Ul, Epa, Gs, CE/CCC

Støtte tilpasning: OEM, Odm

Opprinnelsessted: Kina

Produktnavn: Pointer type oil level gauge

Type: YSF/YZS

Omgivelsestemperatur: -40°C~+50°C

Tekstur Av Materiale: Metall

Temperaturområde: ＜90%(på 20 ℃)

Applicable To Oil Tank Diameter: 800mm-1600mm

Installation Flange Opening: 80mm-130mm

Float Diameter: 80-125mm

Waterproof Performance: IP55

Emballasje & Leveranse