تحليل عملي لتأثير نسبة المكون والعاكس على توليد الطاقة

After installing the photovoltaic system, the most important concern for users is the power generation, as it directly affects their investment return. Many factors affect power generation, including the quality of components, العاكسون, الكابلات, installation orientation angle, tilt angle, تراب, shadow obstruction, component and inverter ratio system scheme, line design, بناء, grid voltage, and other factors. The following mainly discusses the impact of the ratio of components and العاكسون on the system's power generation.

Because inverters only account for about 5% of the cost of photovoltaic systems, reducing inverter investment through component overmatching is not only not cost-effective but also brings other problems. To comprehensively consider factors such as lighting conditions, installation site, components, والعاكسون, scientific design should be carried out, tailored to local conditions, and specific problem-specific analysis should be carried out rather than unthinkingly utilizing the overmatching ability of inverters.

The inverter has multiple MPPTs, each of which tracks independently to be connected to different strings. The inclination angle of the string can also be different, but each MPPT branch has a current limit, such as a 20kW inverter and two MPPTs, and each MPPT circuit can output up to 11kW at the rated working voltage. If multiple connections are made, the power will be limited. The customer connected three channels, with an input power of 15.12kW and an additional 4.12kW. When the weather is good, and the sun is strong, the power will be limited, so losing 10 kWh of electricity in a day is not surprising.

The working voltage is around the rated working voltage of the inverter, resulting in the highest efficiency. For single-phase 220V output inverters, their rated input voltage is 360V; The rated input voltage of a three-phase 380V output inverter is 650V. على سبيل المثال, a 3kW inverter with a 260W component and a working voltage of 30.5V, مع 12 modules and a working voltage of 366V, is the optimal power of 3.12kW. The 30KW inverter is equipped with 260W components, connected to 126 components, 21 strings in each circuit, and a voltage of 640.5V. The optimal total power is 32.76kW. The greater the difference between the string MPPT voltage and the optimal voltage of the inverter (low or high), the lower the efficiency. على سبيل المثال, when a single-phase inverter is string-matched to 260V or 460V, the efficiency is only about 90% of the optimal voltage.

Several points to note when configuring components and inverters

1) We cannot simply emphasize component overfitting to reduce the cost of inverters. We need to analyze specific issues based on the actual situation.

2) Each inverter's MPPT circuit also has limitations and cannot be exceeded.

3) The string voltage should be within the optimal voltage range of the inverter as much as possible, as both low and high voltages can significantly impact power generation.

مورد عالي الجودة

شركة PDDN لتكنولوجيا الإلكترون الضوئي, المحدودة. يركز على البحث, تطوير, وتطبيق تكنولوجيا إلكترونيات الطاقة وهي مخصصة لتزويد العملاء بمحولات عالية الجودة， الثايرستور, ومنتجات الطاقة الأخرى. شركتنا لديها بشكل رئيسي محولات الطاقة الشمسية， محولات, منظمات الجهد, خزائن التوزيع, الثايرستور， وحدات， الثنائيات， سخانات, وغيرها من الأجهزة الإلكترونية أو أشباه الموصلات. الأجهزة الإلكترونية ومنتجات أشباه الموصلات المقدمة من شركة PDDN Photoelectron Technology Co., المحدودة. لديها خصائص الكفاءة العالية, أمان, والموثوقية. يتم استخدامها على نطاق واسع في أنظمة الطاقة, التحكم الصناعي, إدارة الطاقة, وغيرها من المجالات.

ويقبل الدفع عن طريق بطاقة الائتمان, تي/تي, اتحاد غرب, وباي بال. ستقوم PDDN بشحن البضائع إلى العملاء في الخارج من خلال FedEx, دي إتش إل, عن طريق البحر, أو عن طريق الجو. يرجى الاستفسار إذا كنت تريد جودة عالية الأجهزة الإلكترونية أو منتجات أشباه الموصلات; سوف نساعد.