Análisis práctico del impacto de la relación entre componentes e inversores en la generación de energía.

After installing the photovoltaic system, the most important concern for users is the power generation, as it directly affects their investment return. Many factors affect power generation, including the quality of components, inversores, cables, installation orientation angle, tilt angle, polvo, shadow obstruction, component and inverter ratio system scheme, line design, construcción, grid voltage, and other factors. The following mainly discusses the impact of the ratio of components and inversores on the system's power generation.

Because inverters only account for about 5% of the cost of photovoltaic systems, reducing inverter investment through component overmatching is not only not cost-effective but also brings other problems. To comprehensively consider factors such as lighting conditions, installation site, components, e inversores, scientific design should be carried out, tailored to local conditions, and specific problem-specific analysis should be carried out rather than unthinkingly utilizing the overmatching ability of inverters.

The inverter has multiple MPPTs, each of which tracks independently to be connected to different strings. The inclination angle of the string can also be different, but each MPPT branch has a current limit, such as a 20kW inverter and two MPPTs, and each MPPT circuit can output up to 11kW at the rated working voltage. If multiple connections are made, the power will be limited. The customer connected three channels, with an input power of 15.12kW and an additional 4.12kW. When the weather is good, and the sun is strong, the power will be limited, so losing 10 kWh of electricity in a day is not surprising.

The working voltage is around the rated working voltage of the inverter, resulting in the highest efficiency. For single-phase 220V output inverters, their rated input voltage is 360V; The rated input voltage of a three-phase 380V output inverter is 650V. Por ejemplo, a 3kW inverter with a 260W component and a working voltage of 30.5V, con 12 modules and a working voltage of 366V, is the optimal power of 3.12kW. The 30KW inverter is equipped with 260W components, connected to 126 components, 21 strings in each circuit, and a voltage of 640.5V. The optimal total power is 32.76kW. The greater the difference between the string MPPT voltage and the optimal voltage of the inverter (low or high), the lower the efficiency. Por ejemplo, when a single-phase inverter is string-matched to 260V or 460V, the efficiency is only about 90% of the optimal voltage.

Several points to note when configuring components and inverters

1) We cannot simply emphasize component overfitting to reduce the cost of inverters. We need to analyze specific issues based on the actual situation.

2) Each inverter's MPPT circuit also has limitations and cannot be exceeded.

3) The string voltage should be within the optimal voltage range of the inverter as much as possible, as both low and high voltages can significantly impact power generation.

Proveedor de alta calidad

PDDN Photoelectron Technology Co., Limitado. se centra en la investigación, desarrollo, y aplicación de tecnología de electrónica de potencia y se dedica a suministrar a los clientes transformadores de alta calidad.， tiristores, y otros productos de energía. Nuestra empresa cuenta principalmente con inversores solares.， transformadores, reguladores de voltaje, gabinetes de distribución, tiristores， módulos， diodos， calentadores, y otros dispositivos electrónicos o semiconductores. Los dispositivos electrónicos y productos semiconductores proporcionados por PDDN Photoelectron Technology Co., Limitado. tener las características de alta eficiencia, seguridad, y confiabilidad. Son ampliamente utilizados en sistemas de energía., controles industriales, gestión de energía, y otros campos.

Acepta pago mediante Tarjeta de Crédito, T/T, Unión Oeste, y paypal. PDDN enviará los productos a clientes en el extranjero a través de FedEx, DHL, por mar, o por aire. Por favor pregunte si desea alta calidad. dispositivos electrónicos o productos semiconductores; nosotros ayudaremos.