Selection Guide for Oil Immersed Transformers: How to Reduce Costs and Improve Operating Efficiency

1.Why is it important to select oil immersed transformers correctly

Dalam sistem kuasa, the selection of transformer tenggelam minyak directly affects operational safety, energy consumption costs, and service life. Improper selection may lead to increased energy consumption, frequent malfunctions, and even affect the overall project schedule. Oleh itu, scientific selection is particularly crucial during the procurement and design phases.

1.1 Basic classification of oil immersed transformers

At present, oil immersed transformers on the market are mainly divided into the following categories:

Distribution oil immersed transformer
Electric oil immersed transformer
Oil immersed transformer for boosting
Oil immersed transformer for voltage reduction

Different types are suitable for different application scenarios. Oleh itu, clarifying the purpose is the first step in selection.

1.2 Analysis of Common Application Scenarios

Transformer terendam minyak digunakan secara meluas dalam:

Urban power distribution network
industrial park
New energy power station
Infrastructure projects
In these scenarios, the requirements for capacity, loss, and reliability vary.

transformer tenggelam minyak

2.Core parameters for selecting oil immersed transformers

2.1 Selection of Rated Capacity

The selection of capacity should follow the principle of “slight margin”. Small capacity can easily lead to long-term overload operation; If the capacity is too large, it will result in investment waste and increased no-load losses.

General suggestion:

Conventional load: Choose a load rate of 70% -80%
Fluctuating load: Reserve a margin of 10% -20%

2.2 Voltage level and frequency

The high and low voltage levels of oil immersed transformers must be matched with the power grid system. Common voltage levels include 10kV, 20kV, 35kV, dll. Sementara itu, it is necessary to confirm whether the frequency is 50Hz or 60Hz to meet the requirements of different countries and regions.

2.3 Selection of Copper and Aluminum Winding

This is one of the most common concerns of customers.

Copper winding: low loss, jangka hayat yang panjang, high price
Aluminum winding: low cost, light weight, high cost-effectiveness

In export projects, aluminum winding oil immersed transformers are more popular in price sensitive markets.

3.How to reduce the comprehensive cost of oil immersed transformers

3.1 Pay attention to the full lifecycle cost

Many customers only focus on purchasing prices but overlook operating costs. In fact, the electricity expenses caused by losses are often higher than the initial investment.

Oleh itu, when comparing schemes, the following should be considered simultaneously:

kehilangan tanpa beban
kehilangan beban
maintenance cost

3.2 Reasonable selection of cooling methods

Common cooling methods include ONAN, HIDUP MATI, dll. For ordinary power distribution projects, ONAN is already sufficient for use. Choosing excessively high configurations can actually increase costs.

oil immersed distribution

4.Market trend of oil immersed transformers

With the continuous growth of global power investment, the oil immersed transformer market maintains stable demand. Pada masa yang sama, energy-saving standards and certification requirements are constantly increasing.

4.1 High efficiency and energy conservation become mainstream

Low loss design has become an important selling point for oil immersed transformers. Products that comply with international standards such as IEC and IEEE are more likely to enter overseas markets.

4.2 The export market continues to expand

There is a strong demand for oil immersed transformers in regions such as the Middle East, Afrika, and Southeast Asia, where price competition and quality requirements coexist.