Overview of Factory Coated Transformer Resin Braided Insulation 2715 Pvc Silikon Fiber Glass Lengan Penebat Fiberglass Sleeving

Penebat Jalinan Resin Transformer Bersalut Kilang 2715 Pvc Silicone Fiber Glass Insulating Sleeves Fiberglass Sleeving is the primary insulation device outside the transformer box, digunakan untuk memastikan penebat wayar penggulungan pengubah. Ia terdiri daripada beberapa bahagian, termasuk teras kapasitor bertebat pusat, komponen porselin atas dan bawah terlindung luaran, dll. Mengikut tahap voltan, terdapat pelbagai bentuk sesendal, seperti seramik tulen, sesendal berisi minyak, dan sesendal kapasitor. Semasa operasi transformer, lengan penebat yang melaluinya penggulungan adalah salah satu komponen pembawa arusnya, yang perlu menahan arus beban dan arus litar pintas.

Characteristics of Factory Coated Transformer Resin Braided Insulation 2715 Pvc Silikon Fiber Glass Lengan Penebat Fiberglass Sleeving

Prestasi penebat elektrik yang sangat baik: Ia berkesan boleh menghalang kesan buruk arus pada wayar, kabel, atau peralatan.

Rintangan suhu tinggi: Diperbuat daripada bahan tahan suhu tinggi, ia boleh mengekalkan prestasi cemerlang dalam persekitaran suhu tinggi.

Rintangan kakisan: Ia berkesan boleh menghalang bahan kimia daripada menyebabkan kerosakan kakisan pada wayar, kabel, atau peralatan.

Prestasi antipenuaan: Mengekalkan prestasi yang stabil dalam penggunaan jangka panjang dan memanjangkan hayat perkhidmatan dengan berkesan.

Kekuatan mekanikal yang baik dan prestasi pengedap: mampu menahan terlalu panas serta merta sekiranya berlaku litar pintas, dengan penampilan yang kecil, berat kecil, prestasi pengedap yang baik, serba boleh yang kuat, dan penyelenggaraan yang mudah.”

Specification of Factory Coated Transformer Resin Braided Insulation 2715 Pvc Silikon Fiber Glass Lengan Penebat Fiberglass Sleeving

These insulating sleeves protect wires and connections inside transformers. They are made from fiberglass braid. This fiberglass core gives strength and resists heat. The core gets coated with a special resin. This resin seals the fiberglass. It makes the sleeve tough and less likely to absorb moisture. Factory workers apply this resin coating carefully. This ensures the coating is even and reliable.

Next comes the outer layer. This layer uses PVC or silicone. The PVC version is very common. It offers good electrical insulation. It also protects against chemicals, minyak, dan lelasan. The silicone version is for higher temperatures. Silicone handles extreme heat better. Both outer layers make the sleeve flexible. This flexibility helps installers fit it easily over parts. The sleeve stays smooth, preventing snags.

These sleeves handle very high temperatures. PVC sleeves typically work up to 105°C. Silicone sleeves withstand much more heat, often up to 200°C. This high heat resistance is crucial inside transformers. Transformer menghasilkan haba yang ketara semasa operasi. The sleeves prevent wires from melting or shorting. They maintain safety and performance.

The braided design allows stretching. The sleeve can expand slightly when pulled over components. It then contracts back snugly. This tight fit provides excellent protection. It shields against dust, lembapan, dan sentuhan tidak sengaja. The fiberglass core adds mechanical strength. It resists cuts, air mata, and punctures during handling.

Factory coating ensures consistent quality. Every sleeve gets the same resin treatment. This guarantees reliable electrical insulation properties. The 2715 designation often refers to specific dimensions. Common sizes include various inner diameters and wall thicknesses. Choosing the right size ensures proper fit and protection. These sleeves are essential for transformer longevity. They prevent electrical failures caused by insulation breakdown. They are a vital component for safe power distribution.

Applications of Factory Coated Transformer Resin Braided Insulation 2715 Pvc Silikon Fiber Glass Lengan Penebat Fiberglass Sleeving

Penebat Jalinan Resin Transformer Bersalut Kilang 2715 PVC Silicone Fiber Glass Insulating Sleeves offer vital protection in demanding electrical settings. These sleeves are essential for insulating wires and components. They shield against electrical shorts. They also guard against heat damage. The core material is braided fiberglass. This gives inherent strength and flexibility. The braided structure allows the sleeve to stretch. It fits snugly over various shapes and sizes. This ensures consistent coverage.

A special resin coating bonds to the fiberglass braid. This coating is key. It significantly boosts the sleeve’s electrical insulation properties. The coating seals the fibers. This prevents tracking and surface leakage. It enhances dielectric strength. The resin also improves resistance to moisture and chemicals. This protects the underlying components from corrosion. It maintains performance in harsh environments.

These sleeves handle high temperatures reliably. They are suitable for use inside transformers. Transformer menghasilkan haba yang ketara semasa operasi. The sleeves resist thermal degradation. This prevents insulation breakdown. They protect windings, memimpin, dan sambungan. They are also used on busbars and other high-voltage parts. Their durability is important. They withstand mechanical stress and vibration common in transformers.

The 2715 sleeves provide excellent flame retardance. Fire safety is critical in electrical equipment. The materials resist ignition. They help contain potential fires. Their abrasion resistance is another benefit. This protects wires during installation and maintenance. It prevents wear from rubbing against other parts. This extends the lifespan of the wiring system.

Pemasangan adalah mudah. The sleeves slide easily over wires or components. Their flexibility simplifies routing in tight spaces. They offer a cost-effective solution. They deliver reliable, penebat tahan lama. Ini mengurangkan keperluan penyelenggaraan. It prevents costly electrical failures. These sleeves are a trusted choice. They meet the strict demands of power transformers and similar heavy-duty electrical applications. They ensure safety and consistent operation.

Profil Syarikat

PDDN Photoelectron Technology Co., Ltd. ialah salah satu perusahaan terkemuka dalam teknologi elektronik kuasa dan produk kuasa, yang terlibat sepenuhnya dalam membangunkan penyongsang suria， transformer, pengawal selia voltan, kabinet pengedaran, thyristor， modul， diod， pemanas, dan peranti elektronik atau semikonduktor lain. Kami akan komited untuk menyediakan pengguna yang berkualiti tinggi, produk yang cekap dan perkhidmatan yang bertimbang rasa.

Ia menerima pembayaran melalui Kad Kredit, T/T, West Union, dan Paypal. PDDN akan menghantar barangan kepada pelanggan di luar negara melalui FedEx, DHL, melalui laut, atau melalui udara. If you want high-quality Factory Coated Transformer Resin Braided Insulation 2715 Pvc Silikon Fiber Glass Lengan Penebat Fiberglass Sleeving, sila hantarkan pertanyaan kepada kami; kami akan berada di sini untuk membantu anda.

Kaedah Pembayaran

L/C, T/T, Western Union, Paypal, Kad Kredit dll.

Penghantaran

Melalui laut, melalui udara, secara ekspres, sebagai permintaan pelanggan.

Keadaan Penyimpanan

1) Simpan dalam persekitaran yang kering pada suhu bilik.

2) Elakkan suhu lembap dan tinggi.

3) Gunakan segera selepas membuka beg pembungkusan dalam.

5 FAQs of Factory Coated Transformer Resin Braided Insulation 2715 Pvc Silikon Fiber Glass Lengan Penebat Fiberglass Sleeving

People ask many questions about our Factory Coated Transformer Resin Braided Insulation 2715 PVC Silicone Fiber Glass Insulating Sleeves. Here are the top five.

What exactly is this sleeving? It’s a tough braided tube made from fiberglass. A special coating covers it. This coating is a mix of PVC, silikon, and transformer resin. The braid gives strength. The coating adds protection.

What temperatures can it handle? This sleeving works well in very hot places. It handles temperatures up to 155°C (311°F) secara berterusan. It can manage short bursts even hotter. This makes it good for transformers, motor, and electrical parts near heat.

Why is the coating important? The coating does several jobs. It seals the fiberglass braid. This stops fraying. It makes the sleeve resistant to oils, bahan kimia, dan kelembapan. It also improves electrical insulation. The coating adds flame resistance.

Is it flexible? ya, it stays flexible. The braided design allows bending. You can put it on wires, kabel, or components easily. It fits snugly over different shapes. This flexibility helps during installation and in tight spaces.

Bagaimana anda memasangnya? Pemasangan adalah mudah. Potong lengan baju mengikut panjang yang anda perlukan. Slide it over the wire, cable, or component. That’s the basic step. The coating helps it stay in place. It protects the part inside reliably.