Overview of Transformer Or Motor Rewinding Insulating Fiberglass Braided Sleeving PVC/silicone Insulation Material Fiberglass Sleeve

Transformer Or Motor Rewinding Insulating Fiberglass Braided Sleeving PVC/silicone Insulation Material Fiberglass Sleeve is the primary insulation device outside the transformer box, digunakan untuk memastikan penebat wayar penggulungan pengubah. Ia terdiri daripada beberapa bahagian, termasuk teras kapasitor bertebat pusat, komponen porselin atas dan bawah terlindung luaran, dll. Mengikut tahap voltan, terdapat pelbagai bentuk sesendal, seperti seramik tulen, sesendal berisi minyak, dan sesendal kapasitor. Semasa operasi transformer, lengan penebat yang melaluinya penggulungan adalah salah satu komponen pembawa arusnya, yang perlu menahan arus beban dan arus litar pintas.

Characteristics of Transformer Or Motor Rewinding Insulating Fiberglass Braided Sleeving PVC/silicone Insulation Material Fiberglass Sleeve

Prestasi penebat elektrik yang sangat baik: Ia berkesan boleh menghalang kesan buruk arus pada wayar, kabel, atau peralatan.

Rintangan suhu tinggi: Diperbuat daripada bahan tahan suhu tinggi, ia boleh mengekalkan prestasi cemerlang dalam persekitaran suhu tinggi.

Rintangan kakisan: Ia berkesan boleh menghalang bahan kimia daripada menyebabkan kerosakan kakisan pada wayar, kabel, atau peralatan.

Prestasi antipenuaan: Mengekalkan prestasi yang stabil dalam penggunaan jangka panjang dan memanjangkan hayat perkhidmatan dengan berkesan.

Kekuatan mekanikal yang baik dan prestasi pengedap: mampu menahan terlalu panas serta merta sekiranya berlaku litar pintas, dengan penampilan yang kecil, berat kecil, prestasi pengedap yang baik, serba boleh yang kuat, dan penyelenggaraan yang mudah.”

Specification of Transformer Or Motor Rewinding Insulating Fiberglass Braided Sleeving PVC/silicone Insulation Material Fiberglass Sleeve

This fiberglass braided sleeving protects electrical wires and components. People use it when rewinding transformers and motors. Ia menyediakan penebat elektrik yang kuat. The base material is woven fiberglass. This fiberglass sleeve is very tough. Fiberglass naturally resists high temperatures.

The sleeving gets coated for extra protection. Common coatings are PVC or silicone. PVC coating is flexible and cost-effective. It handles temperatures up to 105°C. Silicone coating handles much more extreme heat. Silicone-coated sleeves withstand temperatures over 200°C. Silicone also offers better chemical resistance.

The braided design is important. It lets the sleeving stretch and bend easily. You can slide it over wires or components quickly. It fits snugly around odd shapes and bends. Ini menjadikan pemasangan mudah. The braid also compresses well. It fills gaps effectively.

This sleeving stops electricity leaks. Ia menghalang litar pintas. It protects wires from abrasion and cuts. The fiberglass and coatings resist many chemicals. Oils and solvents won’t easily damage it. The material doesn’t burn easily. It meets flame-retardant standards. This adds safety.

People rely on it in demanding environments. Rewinding shops use it constantly. It insulates motor windings and transformer coils. Industrial machinery needs this protection. Power generation equipment uses it. You find it in appliances and heavy vehicles. It works wherever wires face heat, friction, atau bahan kimia. Choose PVC for general use. Choose silicone for extreme heat.

Applications of Transformer Or Motor Rewinding Insulating Fiberglass Braided Sleeving PVC/silicone Insulation Material Fiberglass Sleeve

This fiberglass braided sleeving with PVC or silicone coating is essential insulation for transformer and motor rewinding. Its primary job is protecting electrical wires. Wires inside transformers and motors face tough conditions. They get very hot during operation. Electrical currents constantly flow through them. Physical movement and abrasion happen too. This sleeving creates a strong barrier.

The braided fiberglass base gives the sleeve its core strength. Fiberglass naturally resists high heat. It doesn’t easily burn or melt. The tight braid structure makes the sleeve very flexible. You can easily slide it over wire bundles and coils. It bends smoothly around tight corners without kinking. This flexibility is vital during the rewinding process.

The PVC or silicone coating applied over the fiberglass adds critical protection. This coating stops electricity from leaking. It prevents short circuits between wires. The coating also seals out moisture, habuk, minyak, dan bahan kimia. These contaminants can damage wire insulation over time. The coating makes the sleeve much tougher against cuts, scrapes, dan pakaian umum. It extends the life of the motor or transformer windings.

Heat resistance is a major benefit. This sleeving handles the high temperatures inside transformers and motors. It doesn’t degrade quickly under thermal stress. The insulation stays effective. This prevents breakdowns and costly failures. Both PVC and silicone versions offer good heat tolerance. Silicone generally withstands even higher temperatures.

The sleeving also provides excellent mechanical protection. The braided design absorbs vibration and shock. It shields wires from being nicked by sharp edges. It guards against abrasion from moving parts. This physical protection is as important as the electrical insulation. The material is durable. It lasts a long time in demanding industrial settings. This sleeving is a reliable, cost-effective solution for protecting critical electrical components.

Profil Syarikat

PDDN Photoelectron Technology Co., Ltd. ialah salah satu perusahaan terkemuka dalam teknologi elektronik kuasa dan produk kuasa, yang terlibat sepenuhnya dalam membangunkan penyongsang suria， transformer, pengawal selia voltan, kabinet pengedaran, thyristor， modul， diod， pemanas, dan peranti elektronik atau semikonduktor lain. Kami akan komited untuk menyediakan pengguna yang berkualiti tinggi, produk yang cekap dan perkhidmatan yang bertimbang rasa.

Ia menerima pembayaran melalui Kad Kredit, T/T, West Union, dan Paypal. PDDN akan menghantar barangan kepada pelanggan di luar negara melalui FedEx, DHL, melalui laut, atau melalui udara. If you want high-quality Transformer Or Motor Rewinding Insulating Fiberglass Braided Sleeving PVC/silicone Insulation Material Fiberglass Sleeve, sila hantarkan pertanyaan kepada kami; kami akan berada di sini untuk membantu anda.

Kaedah Pembayaran

L/C, T/T, Western Union, Paypal, Kad Kredit dll.

Penghantaran

Melalui laut, melalui udara, secara ekspres, sebagai permintaan pelanggan.

Keadaan Penyimpanan

1) Simpan dalam persekitaran yang kering pada suhu bilik.

2) Elakkan suhu lembap dan tinggi.

3) Gunakan segera selepas membuka beg pembungkusan dalam.

5 FAQs of Transformer Or Motor Rewinding Insulating Fiberglass Braided Sleeving PVC/silicone Insulation Material Fiberglass Sleeve

Apakah lengan gentian kaca ini?
It’s a braided tube made from fiberglass threads. The sleeve gets coated with PVC or silicone. This coating makes it tough and flexible. People use it mostly for electrical insulation. It protects wires and parts inside transformers and motors.

Why pick this over other insulation?
This sleeving handles extreme conditions well. Ia menahan haba yang tinggi, bahan kimia, and electrical current. It won’t easily burn or melt. It also stays flexible after installation. This protects wires from rubbing or short circuits. It lasts longer than basic tapes or plastics.

Bagaimana ia boleh menjadi panas?
Temperature limits depend on the coating. PVC sleeving usually handles up to 105°C (221°F). Silicone-coated sleeving withstands much higher heat, often 200°C (392°F) or more. Silicone is better near intense heat sources like motor windings or soldering irons. Check the specific product’s rating.

Can liquids damage it?
Both PVC and silicone coatings resist moisture and many chemicals. This prevents corrosion inside the motor or transformer. Silicone generally offers better oil and solvent resistance. It’s a good shield against common industrial fluids. Neither coating soaks up water easily.

Bagaimana saya memilih saiz yang betul?
Measure the wire bundle or component needing coverage. Pick a sleeve with an inside diameter slightly larger than your measurement. This allows easy sliding over the part. Don’t choose one too tight. It needs some space to fit without force. Check the product specs for exact diameters.