Uit excitatie Tap Changer gebruikt voor olietransformator Chinese fabrikant

Off excitation Tap Changer used for Oil Transformer

$14-30 /Stuk/stukken

Optie:

63A/10KV

125A/10KV

250A/10KV

400A/10KV

63A/35KV

125A/35KV

250A/35KV

Steekproef:

$20.00 /Stuk/stukken, 1 Stuk/stukken (Max. Volgorde)
Koop monster

ProductbeschrijvingLuoyang Datang EnergyPhotoelectron deals in de R&D, productie, en verkoop van verschillende media, hoog, en laagspanningstransformatoren en transformatoraccessoires. De transformatoraccessoires omvatten voornamelijk Buchholz Relay, Tik op Wisselaar, oliepeilmeter, Vlinderklep, Vochtvanger, drukreduceerventiel, Crossflow-koelventilator, Bimetaalthermometer, Epoxyhars isolator, enz.The structure of off circuit tap changer consists of a drum, kooi, strip, schijf, en wig.1. The drum structure off-circuit tap changer is usually a single-phase structure switch. The static contact column is cylindrical, and the moving contact is circular. A disk spring is installed in the circular moving contact. When the switch is changed, the moving contact is allowed to have displacement relative to the central axis. The displacement of the moving contact relative to the central axis determines the contact pressure. After the exchange, the moving contact is in a stable position. A drum switch is generally used for voltage regulation in the middle of winding.2. Wedge structure off circuit tap changer Wedge structure off circuit tap changer is named because the moving contact in its contact system is wedge-shaped. The static contact is the same as the drum switch, which is also cylindrical. The moving contact is wedge-shaped. The moving contact of the wedge switch is compressed by a cylindrical spring. The contact resistance is relatively stable. The overheating of the contact is less than that of the drum switch.3. Cage structure non-excitation tap changer The cage switch usually has multiple insulation columns, and the upper end and lower end are provided with metal flanges to connect the insulation columns. A fixed contact is installed on the insulating column. The center of the flange is a rotating shaft on which a moving contact is installed. The insulating shaft of the rotary switch can drive the moving contact to rotate to adjust the tapping position. When the voltage is low, the cage switch can be made into a three-phase structure. When the current is high, or the voltage is high, the fixed contact of the cage switch, which is usually made into a single-phase structure, is cylindrical or plate-shaped, the moving contact is clip-shaped, and the contact spring is a cylindrical spiral spring, with stable pressure and reliable contact. The cage switch is suitable for large currents and high voltage. Now, domestic manufacturers can produce 330kV cage switches with rated currents up to 6000A.4. Strip structure off circuit tap changerHet vaste contact van de stripschakelaar wordt op de lange isolatiekolom of isolatieplaat geïnstalleerd, en het bewegende contact beweegt in een rechte lijn langs de richting van de isolatiekolom om de tappositie te veranderen.5. Disc structure off circuit tap changerThe fixed contact of the disc structure non-excitation switch is installed on the disc-shaped insulating part, and the moving contact rotates in the center of the disc to change the tapping. Disk switch is commonly used for neutral point voltage regulation of Y connection winding, three-phase structure, and the general voltage is not higher than 35kV.

Productkenmerken

Modelnr.: WST250/10

Merk: PDDN

Productfunctie: Pas de uitgangsspanning van de transformator aan

Toepasselijke spanning: 10KV~35KV

Toepasselijke stroom: 36EEN~250A

Aantal kranen: Meerdere

Productvorm: Strippen en ronden

Producttype: Geen opwinding

Spanningsregelend aftapbereik: ±5%

Aantal fasen: Enkel/Drie

Drukregulerende positie: Neutraal punt, midden- en lijneindspanningsregeling

Of het nu slim is: Ja

Plaats van herkomst: China

Productnaam: Kranenwisselaar met olietransformator

Verpakking & Levering