Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

Overview of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency is an enclosed, ground-level electrical distribution transformer commonly used in underground (UG) power systems. It steps down primary high-voltage electricity (e.g., 15kV or 25kV) to a lower secondary voltage (e.g., 120/240V or 480V) for safe distribution to residential neighborhoods, commercial buildings, and industrial parks. Its robust, lockable steel enclosure makes it safe for public areas.

Features of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

Ground-Level Enclosure: A locked, tamper-resistant, weatherproof steel cabinet that protects the internal components and ensures public safety.

Underground Cable Connections: Designed for easy connection to underground primary (high-voltage) and secondary (low-voltage) cables via compartments with built-in bushings.

Compartmentalization: Separate, isolated compartments for high-voltage and low-voltage components, enhancing safety during maintenance.

Ventilation: Designed with louvers or other ventilation systems to allow for proper heat dissipation from the transformer core and coils.

Lifting Lugs: Integrated lifting lugs for easy and safe installation and replacement using a crane or hoist.

Tamper-proof Hardware: Lockable doors with special bolts to prevent unauthorized access.

Fused Switches: Often includes fused disconnect switches for circuit protection and safe isolation.

Pad Foundation: Installed on a concrete pad (“pad-mounted”) to provide a stable, level base.

Specifications of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

This three-phase pad-mounted transformer manages as much as 500kVA. It tips down voltage from 13.2 kV to 480V. The transformer core rests inside a tough steel room. This enclosure secures versus climate and tampering. It is developed for outside ground-level installation. The unit arrives built for simpler configuration.

The plan consists of a total 200kVA electrical substation. This substation devices runs at 50Hz frequency. All significant elements are pre-assembled. This indicates much less work at the setup website. It speeds up obtaining the system functional.

The transformer makes use of mineral oil for cooling and insulation. It fulfills typical sector specifications. The enclosure is lockable for safety and security. The low-voltage side outputs 480V three-phase power. This voltage matches lots of industrial and commercial applications.

The prefabricated substation residences switchgear and protection devices. These manage the inbound 13.2 kV power feed. They also secure the transformer and downstream circuits. The layout concentrates on dependability and simple upkeep. Every little thing needed is contained within the pad-mounted framework.

This devices supplies power for large facilities. Manufacturing facilities, shopping centers, and healthcare facilities make use of comparable configurations. Its pad-mounted style saves space. No unique building is required. The prefabricated approach decreases setup time substantially. It makes sure regular performance right from the start.

Applications of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

This Three-Phase 500kVA Pad-Mounted Transformer is crucial equipment. It creates the core of a 13.2 KV Prefabricated Electrical Substation. The system tips down high voltage power. It delivers 480V power appropriate for demanding sites. The transformer ability is 500kVA. The low-voltage side sustains loads up to 200kVA at 50Hz regularity. This configuration is vital for many markets requiring reputable medium-scale power.

Manufacturing facilities count greatly on this devices. It powers large motors, assembly lines, and heavy machinery. Constant 480V power is important for smooth operations. Factory can not afford voltage changes. This substation supplies stable power.

Business buildings profit considerably. Huge shopping center utilize it for lights, A/C, and escalators. Office complexes require dependable power for computers and web servers. Hospitals depend on it for important medical equipment and life support group. Power failures are undesirable below.

Water treatment plants and pumping terminals utilize these substations. They run huge pumps and control systems constantly. Dependable power makes sure tidy water supply. Wastewater facilities likewise need this robust power solution.

The premade style is a major benefit. The whole substation shows up pre-assembled and checked. Setup is much quicker. Site job is reduced. This saves considerable time and money. The pad-mounted unit is long lasting. It safeguards the transformer and switchgear from weather condition and vandalism. Safety and security for the general public and workers is enhanced.

Room efficiency is an additional benefit. The compact impact fits quickly right into tight places. It functions well in urban areas or crowded industrial websites. Land is typically costly. Conserving room matters.

Maintenance gain access to is straightforward. Specialists can quickly evaluate and service parts. The design focuses on driver safety. This equipment provides power accurately day after day. It manages demanding industrial and business loads successfully.

Profil Perusahaan

PDDN Fotoelektron Technology Co., Ltd. adalah salah satu perusahaan terkemuka di bidang teknologi elektronika daya dan produk daya, yang terlibat penuh dalam pengembangan inverter surya， transformator, pengatur tegangan, lemari distribusi, thyristor， modul， dioda， pemanas, dan perangkat elektronik atau semikonduktor lainnya. Kami akan berkomitmen untuk menyediakan layanan berkualitas tinggi kepada pengguna, produk yang efisien dan layanan penuh perhatian.

Ia menerima pembayaran melalui Kartu Kredit, T/T, Serikat Barat, dan Paypal. PDDN akan mengirimkan barang ke pelanggan di luar negeri melalui FedEx, DHL, melalui laut, atau melalui udara. If you want high-quality Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency, silakan kirimkan pertanyaan kepada kami; kami akan berada di sini untuk membantu Anda.

Metode Pembayaran

L/C, T/T, Serikat Barat, Paypal, Kartu Kredit dll.

Pengiriman

Melalui laut, melalui udara, dengan mengungkapkan, sebagai permintaan pelanggan.

Kondisi Penyimpanan

1) Simpan di lingkungan kering pada suhu kamar.

2) Hindari lembab dan suhu tinggi.

3) Gunakan segera setelah membuka kantong kemasan bagian dalam.

5 FAQs of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

What is this equipment exactly?
This is a complete power substation unit. It comes pre-assembled inside a sturdy metal cabinet. You get a 500kVA transformer inside. It steps down 13,200 volts to 480 volts. The setup includes switches and protective devices. Everything is ready for connection.

What voltages does it handle?
The transformer takes high voltage electricity. The input voltage is 13.2 kilovolts. It reduces this voltage significantly. The output voltage is 480 volts. This low voltage powers buildings or machinery safely. It suits standard industrial needs.

Where do you install this substation?
Place it outdoors on a concrete pad. This is a pad-mounted design. It saves space compared to building a substation room. The steel enclosure protects all components. It withstands weather like rain, sun, and wind. Ensure good ventilation space around it.

What uses does it serve?
This unit distributes power efficiently. It feeds large facilities needing 480V power. Factories use it for heavy machinery. Warehouses need it for lighting and systems. Shopping malls rely on it for central power. It provides reliable electricity for essential operations.

What are key installation points?
The pad must be level and strong. Follow local electrical codes exactly. Only qualified electricians should connect the high-voltage lines. Ground the enclosure properly. Check clearances for doors and cooling. Maintain access for inspections and servicing.