Dräi-Phas 500kVA Pad-Mounted Transformator 13.2KV Prefabrizéiert elektresch Substation Ausrüstung 480V 200KVA 50Hz Frequenz

Overview of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency is an enclosed, Buedemniveau elektresch Verdeelungstransformator déi allgemeng am Ënnergrond benotzt gëtt (an) Muecht Systemer. Et fällt primär Héichspannungsstroum erof (z.B., 15kV oder 25 kV) zu enger niddereger sekundärer Spannung (z.B., 120/240V oder 480V) fir eng sécher Verdeelung a Wunnquartiere, kommerziell Gebaier, an Industrieparken. Seng robust, gespaarten Stahlkëscht mécht et sécher fir ëffentleche Beräicher.

Features of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

Buedem-Niveau Enclosure: A gespaarten, tamper-resistent, weatherproof Stol Cabinet datt déi intern Komponente schützt a suergt ëffentlech Sécherheet.

Ënnerierdesch Kabel Verbindungen: Entworf fir einfach Verbindung mat ënnerierdesch Primärschoul (héich Volt) an sekundär (niddereg-Volt) Kabelen iwwer Kompartimenter mat agebaute Buschungen.

Kompartimentéierung: Trennen, isoléiert Kompartimenter fir Héichspannung a Low-Volt Komponenten, d'Sécherheet beim Ënnerhalt verbesseren.

Ventilatioun: Entworf mat louvers oder aner Belëftung Systemer fir eng adäquate Hëtzt dissipation vum Transformator Kär a coils erlaben.

Ophiewe Lugs: Integréiert Lifter fir einfach a sécher Installatioun an Ersatz mat engem Kran oder Hiewel.

Tamper-proof Hardware: Sperrbar Dieren mat spezielle Bolzen fir onerlaabten Zougang ze vermeiden.

Fuséiert Schalter: Oft enthält verschmolzene Trennschalter fir Circuitschutz a sécher Isolatioun.

Pad Foundation: Installéiert op engem konkret Pad (“pad-montéiert”) e Stall ze bidden, Niveau Basis.

Specifications of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

This three-phase pad-mounted transformer manages as much as 500kVA. Et Tipps erof Volt vun 13.2 kV bis 480 V. The transformer core rests inside a tough steel room. This enclosure secures versus climate and tampering. It is developed for outside ground-level installation. The unit arrives built for simpler configuration.

The plan consists of a total 200kVA electrical substation. This substation devices runs at 50Hz frequency. All significant elements are pre-assembled. This indicates much less work at the setup website. It speeds up obtaining the system functional.

The transformer makes use of mineral oil for cooling and insulation. It fulfills typical sector specifications. The enclosure is lockable for safety and security. The low-voltage side outputs 480V three-phase power. This voltage matches lots of industrial and commercial applications.

The prefabricated substation residences switchgear and protection devices. These manage the inbound 13.2 kV power feed. They also secure the transformer and downstream circuits. The layout concentrates on dependability and simple upkeep. Every little thing needed is contained within the pad-mounted framework.

This devices supplies power for large facilities. Fabrikatioun Ariichtungen, Akafszentren, and healthcare facilities make use of comparable configurations. Its pad-mounted style saves space. No unique building is required. The prefabricated approach decreases setup time substantially. It makes sure regular performance right from the start.

Applications of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

This Three-Phase 500kVA Pad-Mounted Transformer is crucial equipment. It creates the core of a 13.2 KV Prefabricated Electrical Substation. The system tips down high voltage power. It delivers 480V power appropriate for demanding sites. The transformer ability is 500kVA. The low-voltage side sustains loads up to 200kVA at 50Hz regularity. This configuration is vital for many markets requiring reputable medium-scale power.

Manufacturing facilities count greatly on this devices. Et dréit grouss Motore, Assemblée Linnen, and heavy machinery. Constant 480V power is important for smooth operations. Factory can not afford voltage changes. This substation supplies stable power.

Business buildings profit considerably. Huge shopping center utilize it for lights, A/C, and escalators. Office complexes require dependable power for computers and web servers. Hospitals depend on it for important medical equipment and life support group. Power failures are undesirable below.

Water treatment plants and pumping terminals utilize these substations. They run huge pumps and control systems constantly. Dependable power makes sure tidy water supply. Wastewater facilities likewise need this robust power solution.

The premade style is a major benefit. The whole substation shows up pre-assembled and checked. Setup is much quicker. Site job is reduced. This saves considerable time and money. The pad-mounted unit is long lasting. It safeguards the transformer and switchgear from weather condition and vandalism. Safety and security for the general public and workers is enhanced.

Room efficiency is an additional benefit. The compact impact fits quickly right into tight places. It functions well in urban areas or crowded industrial websites. Land is typically costly. Conserving room matters.

Ënnerhalt kréien Zougang zu ass einfach. Specialists can quickly evaluate and service parts. The design focuses on driver safety. This equipment provides power accurately day after day. It manages demanding industrial and business loads successfully.

Firma Profil

PDDN Photoelectron Technology Co., Ltd., Ltd. ass eng vun de féierende Entreprisen a Kraaftelektronik Technologie a Kraaftprodukter, déi voll an der Entwécklung vu Solarinverter involvéiert ass， transformers, Volt reegler, Verdeelung cabinets, thyristors， Moduler， dioden， Heizungen, an aner elektronesch Apparater oder semiconductors. Mir wäerten verpflichte Benotzer mat héich-Qualitéit ze bidden, effizient Produkter a virsiichteg Service.

Et akzeptéiert Bezuelen iwwer Kreditkaart, T/T, West Unioun, an Paypal. PDDN wäert d'Wueren u Clienten iwwerséiesch iwwer FedEx schécken, DHL, vum Mier, oder duerch Loft. If you want high-quality Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency, weg schéckt eis Ufroen; mir wäerten hei sinn fir Iech ze hëllefen.

Bezuelmethoden

L/C, T/T, Western Union, Paypal, Kreditkaart etc.

Sendung

Mam Mier, duerch Loft, duerch express, wéi Clienten Ufro.

Stockage Konditiounen

1) Store an engem dréchen Ëmfeld bei Raumtemperatur.

2) Vermeiden Feuchtigkeit an héich Temperaturen.

3) Benotzt direkt no der Ouverture vun der banneschten Verpackungsbeutel.

5 FAQs of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

What is this equipment exactly?
This is a complete power substation unit. It comes pre-assembled inside a sturdy metal cabinet. You get a 500kVA transformer inside. Et geet erof 13,200 volt zu 480 volts. The setup includes switches and protective devices. Everything is ready for connection.

Wéi eng Spannungen handelt et?
The transformer takes high voltage electricity. D'Input Volt ass 13.2 kilovolt. It reduces this voltage significantly. The output voltage is 480 volts. This low voltage powers buildings or machinery safely. It suits standard industrial needs.

Where do you install this substation?
Place it outdoors on a concrete pad. This is a pad-mounted design. It saves space compared to building a substation room. The steel enclosure protects all components. It withstands weather like rain, Sonn, a Wand. Ensure good ventilation space around it.

What uses does it serve?
This unit distributes power efficiently. It feeds large facilities needing 480V power. Factories use it for heavy machinery. Warehouses need it for lighting and systems. Shopping malls rely on it for central power. It provides reliable electricity for essential operations.

What are key installation points?
De Pad muss Niveau a staark sinn. Follegt lokal elektresch Coden genau. Only qualified electricians should connect the high-voltage lines. Ground the enclosure properly. Check clearances for doors and cooling. Maintain access for inspections and servicing.