Attrezzatura prefabbricata trifase 480V 200KVA 50Hz della sottostazione elettrica del trasformatore montato su cuscinetto 13.2KV 500kVA

Overview of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency is an enclosed, trasformatore di distribuzione elettrica a livello del suolo comunemente utilizzato in metropolitana (E) sistemi di potere. Diminuisce l'elettricità primaria ad alta tensione (per esempio., 15kV o 25kV) ad una tensione secondaria più bassa (per esempio., 120/240V o 480 V) per una distribuzione sicura nei quartieri residenziali, edifici commerciali, e parchi industriali. È robusto, la custodia in acciaio con serratura lo rende sicuro per le aree pubbliche.

Features of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

Recinzione a livello del suolo: Un bloccato, resistente alle manomissioni, armadio in acciaio resistente alle intemperie che protegge i componenti interni e garantisce la sicurezza pubblica.

Collegamenti via cavo interrati: Progettato per un facile collegamento alla primaria interrata (alta tensione) e secondario (bassa tensione) cavi tramite scomparti con passanti incorporati.

Compartimentalizzazione: Separato, scomparti isolati per componenti ad alta e bassa tensione, aumentare la sicurezza durante la manutenzione.

Ventilazione: Progettato con alette o altri sistemi di ventilazione per consentire un'adeguata dissipazione del calore dal nucleo e dalle bobine del trasformatore.

Alette di sollevamento: Occhielli di sollevamento integrati per un'installazione e una sostituzione facile e sicura utilizzando una gru o un paranco.

Hardware a prova di manomissione: Porte chiudibili con chiavistelli speciali per impedire l'accesso non autorizzato.

Interruttori con fusibile: Spesso include sezionatori con fusibile per la protezione del circuito e l'isolamento sicuro.

Fondotinta Pad: Installato su una piattaforma di cemento (“montato su pad”) per fornire una stalla, base di livello.

Specifications of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

This three-phase pad-mounted transformer manages as much as 500kVA. Riduce la tensione da 13.2 kV a 480 V. The transformer core rests inside a tough steel room. This enclosure secures versus climate and tampering. It is developed for outside ground-level installation. The unit arrives built for simpler configuration.

The plan consists of a total 200kVA electrical substation. This substation devices runs at 50Hz frequency. All significant elements are pre-assembled. This indicates much less work at the setup website. It speeds up obtaining the system functional.

Il trasformatore utilizza olio minerale per il raffreddamento e l'isolamento. It fulfills typical sector specifications. The enclosure is lockable for safety and security. The low-voltage side outputs 480V three-phase power. This voltage matches lots of industrial and commercial applications.

The prefabricated substation residences switchgear and protection devices. These manage the inbound 13.2 kV power feed. They also secure the transformer and downstream circuits. The layout concentrates on dependability and simple upkeep. Every little thing needed is contained within the pad-mounted framework.

This devices supplies power for large facilities. Impianti di produzione, centri commerciali, and healthcare facilities make use of comparable configurations. Its pad-mounted style saves space. No unique building is required. The prefabricated approach decreases setup time substantially. It makes sure regular performance right from the start.

Applications of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

This Three-Phase 500kVA Pad-Mounted Transformer is crucial equipment. It creates the core of a 13.2 KV Prefabricated Electrical Substation. The system tips down high voltage power. It delivers 480V power appropriate for demanding sites. The transformer ability is 500kVA. The low-voltage side sustains loads up to 200kVA at 50Hz regularity. This configuration is vital for many markets requiring reputable medium-scale power.

Manufacturing facilities count greatly on this devices. It powers large motors, linee di assemblaggio, and heavy machinery. Constant 480V power is important for smooth operations. Factory can not afford voltage changes. This substation supplies stable power.

Business buildings profit considerably. Huge shopping center utilize it for lights, aria condizionata, and escalators. Office complexes require dependable power for computers and web servers. Hospitals depend on it for important medical equipment and life support group. Power failures are undesirable below.

Water treatment plants and pumping terminals utilize these substations. They run huge pumps and control systems constantly. Dependable power makes sure tidy water supply. Wastewater facilities likewise need this robust power solution.

The premade style is a major benefit. The whole substation shows up pre-assembled and checked. Setup is much quicker. Site job is reduced. This saves considerable time and money. The pad-mounted unit is long lasting. It safeguards the transformer and switchgear from weather condition and vandalism. Safety and security for the general public and workers is enhanced.

Room efficiency is an additional benefit. The compact impact fits quickly right into tight places. It functions well in urban areas or crowded industrial websites. Land is typically costly. Conserving room matters.

Maintenance gain access to is straightforward. Specialists can quickly evaluate and service parts. The design focuses on driver safety. This equipment provides power accurately day after day. It manages demanding industrial and business loads successfully.

Profilo Aziendale

PDDN Photoelectron Technology Co., Ltd. è una delle aziende leader nella tecnologia dell'elettronica di potenza e nei prodotti energetici, che è pienamente coinvolta nello sviluppo di inverter solari， trasformatori, regolatori di tensione, armadi di distribuzione, tiristori， moduli， diodi， riscaldatori, e altri dispositivi elettronici o semiconduttori. Ci impegneremo a fornire agli utenti prodotti di alta qualità, prodotti efficienti e servizio premuroso.

Accetta il pagamento tramite Carta di Credito, T/T, Unione occidentale, e Paypal. PDDN spedirà la merce ai clienti all'estero tramite FedEx, DHL, via mare, o per via aerea. If you want high-quality Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency, vi preghiamo di inviarci richieste; saremo qui per aiutarti.

Metodi di pagamento

L/C, T/T, Unione occidentale, PayPal, Carta di credito ecc.

Spedizione

Via mare, per via aerea, per espresso, come richiedono i clienti.

Condizioni di conservazione

1) Conservare in un ambiente asciutto a temperatura ambiente.

2) Evitare l'umidità e le alte temperature.

3) Utilizzare immediatamente dopo aver aperto la confezione interna.

5 FAQs of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

Cos'è esattamente questa attrezzatura??
This is a complete power substation unit. It comes pre-assembled inside a sturdy metal cabinet. You get a 500kVA transformer inside. Si dimette 13,200 volt a 480 volt. The setup includes switches and protective devices. Everything is ready for connection.

Quali tensioni gestisce?
The transformer takes high voltage electricity. La tensione in ingresso è 13.2 kilovolt. Riduce significativamente questa tensione. The output voltage is 480 volt. This low voltage powers buildings or machinery safely. It suits standard industrial needs.

Where do you install this substation?
Place it outdoors on a concrete pad. This is a pad-mounted design. It saves space compared to building a substation room. The steel enclosure protects all components. Resiste alle intemperie come la pioggia, sole, e vento. Ensure good ventilation space around it.

What uses does it serve?
This unit distributes power efficiently. It feeds large facilities needing 480V power. Factories use it for heavy machinery. Warehouses need it for lighting and systems. Shopping malls rely on it for central power. It provides reliable electricity for essential operations.

What are key installation points?
Il pad deve essere livellato e resistente. Seguire esattamente i codici elettrici locali. Only qualified electricians should connect the high-voltage lines. Ground the enclosure properly. Check clearances for doors and cooling. Maintain access for inspections and servicing.