삼상 500kVA 패드 장착형 변압기 13.2KV 조립식 전기 변전소 장비 480V 200KVA 50Hz 주파수

Overview of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency is an enclosed, 지하에서 일반적으로 사용되는 지상 배전 변압기 (그리고) 전력 시스템. 1차 고전압 전력을 강압합니다. (예를 들어, 15kV 또는 25kV) 더 낮은 2차 전압으로 (예를 들어, 120/240V 또는 480V) 주거지역에 안전한 유통을 위해, 상업용 건물, 및 산업 단지. 견고함, 잠금 가능한 강철 인클로저로 공공 장소에서도 안전합니다..

Features of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

지상 인클로저: 잠긴, 변조 방지, 내부 부품을 보호하고 공공의 안전을 보장하는 내후성 강철 캐비닛.

지하 케이블 연결: 지하 기본 연결이 용이하도록 설계됨 (고전압) 그리고 이차 (저전압) 부싱이 내장된 구획을 통한 케이블.

구획화: 분리된, 고전압 및 저전압 부품을 위한 격리된 구획, 유지보수 시 안전성 강화.

통풍: 변압기 코어와 코일에서 적절한 열 방출이 가능하도록 루버 또는 기타 환기 시스템으로 설계되었습니다..

리프팅 러그: 크레인이나 호이스트를 사용한 쉽고 안전한 설치 및 교체를 위한 통합 리프팅 러그.

변조 방지 하드웨어: 무단 접근을 방지하기 위해 특수 볼트로 잠글 수 있는 도어.

퓨즈 스위치: 회로 보호 및 안전 절연을 위한 퓨즈 분리 스위치가 포함되는 경우가 많습니다..

패드 파운데이션: 콘크리트 패드 위에 설치 (“패드 장착형”) 안정적인 서비스를 제공하기 위해, 레벨 베이스.

Specifications of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

This three-phase pad-mounted transformer manages as much as 500kVA. 그것은 전압을 아래로 기울입니다. 13.2 kV ~ 480V. The transformer core rests inside a tough steel room. This enclosure secures versus climate and tampering. It is developed for outside ground-level installation. The unit arrives built for simpler configuration.

The plan consists of a total 200kVA electrical substation. This substation devices runs at 50Hz frequency. All significant elements are pre-assembled. This indicates much less work at the setup website. It speeds up obtaining the system functional.

변압기는 냉각 및 절연을 위해 미네랄 오일을 사용합니다.. It fulfills typical sector specifications. The enclosure is lockable for safety and security. The low-voltage side outputs 480V three-phase power. This voltage matches lots of industrial and commercial applications.

The prefabricated substation residences switchgear and protection devices. These manage the inbound 13.2 kV power feed. They also secure the transformer and downstream circuits. The layout concentrates on dependability and simple upkeep. Every little thing needed is contained within the pad-mounted framework.

This devices supplies power for large facilities. 제조시설, 쇼핑 센터, and healthcare facilities make use of comparable configurations. Its pad-mounted style saves space. No unique building is required. The prefabricated approach decreases setup time substantially. It makes sure regular performance right from the start.

Applications of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

This Three-Phase 500kVA Pad-Mounted Transformer is crucial equipment. It creates the core of a 13.2 KV Prefabricated Electrical Substation. The system tips down high voltage power. It delivers 480V power appropriate for demanding sites. The transformer ability is 500kVA. The low-voltage side sustains loads up to 200kVA at 50Hz regularity. This configuration is vital for many markets requiring reputable medium-scale power.

Manufacturing facilities count greatly on this devices. It powers large motors, 조립 라인, 그리고 중장비. Constant 480V power is important for smooth operations. Factory can not afford voltage changes. This substation supplies stable power.

Business buildings profit considerably. Huge shopping center utilize it for lights, 에어컨, and escalators. Office complexes require dependable power for computers and web servers. Hospitals depend on it for important medical equipment and life support group. Power failures are undesirable below.

Water treatment plants and pumping terminals utilize these substations. They run huge pumps and control systems constantly. Dependable power makes sure tidy water supply. Wastewater facilities likewise need this robust power solution.

The premade style is a major benefit. The whole substation shows up pre-assembled and checked. Setup is much quicker. Site job is reduced. This saves considerable time and money. The pad-mounted unit is long lasting. It safeguards the transformer and switchgear from weather condition and vandalism. Safety and security for the general public and workers is enhanced.

Room efficiency is an additional benefit. The compact impact fits quickly right into tight places. It functions well in urban areas or crowded industrial websites. Land is typically costly. Conserving room matters.

유지 관리에 대한 액세스는 간단합니다.. Specialists can quickly evaluate and service parts. The design focuses on driver safety. This equipment provides power accurately day after day. It manages demanding industrial and business loads successfully.

회사 프로필

PDDN 광전자 기술 유한 회사, 주식회사. 전력 전자 기술 및 전력 제품 분야의 선도적인 기업 중 하나입니다., 태양광 인버터 개발에 전적으로 참여하고 있습니다.， 변압기, 전압 조정기, 배포 캐비닛, 사이리스터， 모듈， 다이오드， 히터, 및 기타 전자 장치 또는 반도체. 우리는 사용자에게 고품질을 제공하기 위해 최선을 다할 것입니다, 효율적인 제품과 사려 깊은 서비스.

신용카드 결제가 가능합니다., 티/티, 웨스트유니언, 그리고 페이팔. PDDN은 FedEx를 통해 해외 고객에게 상품을 배송합니다., DHL, 바다로, 아니면 비행기로. If you want high-quality Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency, 문의사항을 보내주세요; 우리는 당신을 돕기 위해 여기 있을 것입니다.

결제 방법

신용장, 티/티, 웨스턴 유니온, 페이팔, 신용카드 등.

선적

바다로, 비행기로, 급행으로, 고객의 요청에 따라.

보관 조건

1) 실온의 건조한 환경에 보관하세요..

2) 습기와 고온을 피하십시오.

3) 내부 포장백 개봉 후 즉시 사용.

5 FAQs of Three-Phase 500kVA Pad-Mounted Transformer 13.2KV Prefabricated Electrical Substation Equipment 480V 200KVA 50Hz Frequency

What is this equipment exactly?
This is a complete power substation unit. It comes pre-assembled inside a sturdy metal cabinet. You get a 500kVA transformer inside. 그것은 물러난다 13,200 볼트 480 볼트. The setup includes switches and protective devices. Everything is ready for connection.

어떤 전압을 처리합니까??
The transformer takes high voltage electricity. 입력 전압은 13.2 킬로볼트. It reduces this voltage significantly. 출력 전압은 480 볼트. This low voltage powers buildings or machinery safely. It suits standard industrial needs.

Where do you install this substation?
Place it outdoors on a concrete pad. This is a pad-mounted design. It saves space compared to building a substation room. The steel enclosure protects all components. It withstands weather like rain, 해, 그리고 바람. Ensure good ventilation space around it.

What uses does it serve?
This unit distributes power efficiently. It feeds large facilities needing 480V power. Factories use it for heavy machinery. Warehouses need it for lighting and systems. Shopping malls rely on it for central power. It provides reliable electricity for essential operations.

What are key installation points?
The pad must be level and strong. 현지 전기 규정을 정확하게 따르십시오.. Only qualified electricians should connect the high-voltage lines. Ground the enclosure properly. Check clearances for doors and cooling. Maintain access for inspections and servicing.