S11 Series 35KV 5000kva high voltage set-down transformer
| Payment Type: | L/C,T/T,D/P,D/A,Paypal,Money Gram,Western Union,D/A |
| Incoterm: | FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,DEQ,DDP,DDU,Express Delivery,DAF,DES |
| Min. Order: | 1 Set/Sets |
| Transportation: | Ocean,Land |
- Category: Conservator Type Transformer
Product Attributes
Model No.: S11-5000KVA/35KV
Brand: PDDN
Place Of Origin: China
Use: Power, Current, Electronic, High Frequency, Lighting, Audio, Potential, Instrument, Rectifier, Pulse, Reactor
Phase: Three
Coil Structure: Toroidal
Number Of Coils: Autotransformer
Product Name: Oil immersed transformer with conservator
Rated Capacity: 1MVA~120MVA
Rated Primary Voltage: 11KV~110KV
Rated Secondary Voltage: 400V ~10000V or Customized according to requirements
Frequency: 50Hz/60Hz
Connection Form: A
Cooling Mode: ONAN
Connection Group Number: Dyn11/Dyn0
Core Material: Copper / aluminum
Packaging & Delivery
| Selling Units | : | Set/Sets |
| Single package size | : | 130cm*95cm*150cm |
| Single gross weight | : | 1000kg |
| Package Type | : | Wooden case |
Product Description
Product introduction
1000kVA and above Oil Immersed Transformers must be equipped with outdoor signal thermometers and can be connected to remote signals. Oil-immersed transformers of 800kVA and above shall be equipped with a Gas Relay and pressure protection device. Oil-immersed transformers of 800kVA and below can also be equipped with gas relays according to the use requirements and through consultation with the manufacturer. Dry-type transformers shall be equipped with temperature measuring devices according to the manufacturer's regulations, generally 630kVA and above transformers.
The products are classified according to the phase number of a single transformer, which can be divided into three-phase transformers and single-phase transformers. In three-phase power systems, three-phase transformers are generally used. When the capacity is too large and limited by transportation conditions, three single-phase transformers can also be used in three-phase power systems to form transformer banks.
Winding division
Transformers are usually composed of two windings, which are wrapped around an iron core. One of them is the primary winding, and the other is the secondary winding.
Structural classification
It can be divided into a core transformer and a shell transformer. If the winding is wrapped around the iron core, it is an iron core transformer; If the iron core is wrapped around the winding, it is a shell-type transformer. However, they are slightly different in structure and have no essential difference in principle. All power transformers are iron core type.
The transformer is mainly composed of an iron core, winding, oil tank, conservator, insulating sleeve, tap changer, gas relay, etc.
Send an Inquiry
Your email address will not published. Required fieled are marked.
Related Products
Check out other related Products
