Analisis teknikal komprehensif transformer jenis kering: Mengapa ia mempercepatkan penggantian transformer tenggelam minyak dalam gelombang tenaga baru dan pusat data?

With the rapid development of new energy, kenderaan elektrik, pusat data, and urban power distribution systems, Pengubah Jenis Kering are experiencing a new round of growth worldwide.
Compared with traditional oil immersed transformers, dry-type transformers have obvious advantages in safety, perlindungan alam sekitar, and maintenance costs, especially in high fire protection requirements, densely populated or indoor installation scenarios, and are accelerating the replacement of oil immersed solutions.

This article will systematically analyze the technical value and market logic of dry-type transformer from five dimensions: prinsip struktur, core technologies, senario aplikasi, piawaian antarabangsa, dan trend masa depan.

1.Basic principles and structure of transformer jenis kering

1.1 Prinsip kerja transformer jenis kering

Dry-type transformers essentially still follow the principle of electromagnetic induction, completing voltage conversion through magnetic flux coupling between the primary and secondary windings.
The biggest difference from oil immersed transformers is that:

Not using insulating oil as a cooling and insulating medium
Mainly relying on air convection or forced air cooling for heat dissipation
This has led to fundamental changes in its structure and operational characteristics.

1.2 Komponen struktur utama

Dry-type transformers typically consist of the following core components:

teras besi

• Stacking of cold-rolled silicon steel sheets
• Low loss, high magnetic permeability design

penggulungan

• High voltage winding: mostly made of copper or aluminum conductors
• Low voltage winding: foil winding or wire winding structure

Sistem penebat

• Epoxy resin casting
• Insulation paper+glass fiber composite

sistem penyejukan

• AN (natural air cooling)
• DARIPADA (forced air cooling)

2.The mainstream technical route of dry-type transformers

2.1 Epoxy resin cast dry-type transformers

This is currently the most widely used and technologically mature type, characterized by:

• The winding is cast as a whole, with strong short-circuit resistance
• Excellent moisture and dust resistance
• Suitable for harsh environments

But at the same time, there are also:

• Relatively high cost
• Difficulty in maintenance

2.2 Non encapsulated (VPI) transformer jenis kering

The dry-type transformers with VPI (Impregnasi Tekanan Vakum) vacuum pressure impregnation process has seen a significant increase in demand in overseas markets in recent years.

Ciri-ciri Utama:

• Better heat dissipation performance
• Low operating noise
• Suitable for high-capacity and continuous load conditions

2.3 High temperature insulated dry-type transformers

With the development of new material technology, H-class and C-class insulation systems are gradually being applied to dry-type transformers:

• Allow for higher operating temperatures
• Enhance power density
• Suitable for the fields of new energy and rail transit

3.Dry-type transformers vs oil immersed transformers

3.1 Safety Comparison

3.2 Operations and Life Cycle Costs

Although the initial procurement cost of dry-type transformer is higher than that of oil immersed transformers, throughout their entire lifecycle:

• No need to change the oil
• Low frequency of operation and maintenance
• Low shutdown risk

TCO (Jumlah Kos Pemilikan) is actually lower.

4.Core application scenarios of dry-type transformers

4.1 New Energy System

• Photovoltaic power station box transformer
• Wind power grid connected system
• Energy storage converter system

4.2 Data Center and Communication Base Station

Data centers have extremely high requirements for fire prevention, kestabilan, and low noise, and dry-type transformers have almost become standard.

4.3 Urban Public Buildings

• hospital
• subway
• kompleks komersial
• High rise office building

5.International Standards and Export Focus

Common international standards for dry-type transformers include:

• IEC 60076-11
• IEEE C57.12
• EN 50541

When exporting, perhatian khusus harus diberikan:

• insulation class
• noise level
• Tahap pelepasan separa
• Tahap perlindungan (IP)

6.Future Trends and Technological Development Directions

6.1 High energy efficiency and low loss

The tightening of energy efficiency regulations in various countries is promoting the development of dry-type transformers towards lower no-load losses.

6.2 Digitization and Intelligent Monitoring

• Temperature online monitoring
• Partial discharge online detection
• Remote operation and maintenance system

6.3 New Materials and Lightweight Design

• New composite insulation materials
• Higher permeability iron core

Against the backdrop of the global power system evolving towards safety, greenness, and digitization, dry-type transformers are no longer just an “alternative solution”, but are becoming the mainstream choice.
For manufacturers and exporters, whoever can lead in technology, piawaian, and application understanding will have an advantage in the global market.

Luoyang Datang Energy Technology Co., Ltd. ialah perusahaan berteknologi tinggi yang menyepadukan R&D, pembuatan dan pembekalan peralatan kuasa seperti transformer, komponen tenaga baharu, kabinet pengedaran dan penyongsang. Dengan inovasi teknologi sebagai teras, kami memberi tumpuan kepada mencipta penyelesaian kuasa yang boleh dipercayai dan berprestasi tinggi untuk memberi perkhidmatan kepada pelanggan global. Dengan sistem kawalan kualiti yang ketat dan pensijilan standard antarabangsa, kami terus mengeluarkan produk cemerlang dan membolehkan pelanggan membina sistem kuasa yang selamat dan stabil.