Hva er en oljenedsenket transformator?

Hva er en oljenedsenket transformator?

Anoljenedsenket transformator is a power transformer that usesisolerende olje (mineral oil or synthetic ester) for bothkjøling ogelektrisk isolasjon. The core and windings are submerged in oil, which dissipates heat and prevents electrical breakdown.

Key Components

1. Kjerne: Laminated silicon steel to reduce eddy current losses.

2. Viklinger: Copper or aluminum conductors (HV/LV).

3. Tank: Sealed steel container filled with oil.

4. Insulating Oil:

• Mineral oil (most common).

• Bio-based or synthetic ester (eco-friendly alternatives).

5. Cooling System:

• Radiators/fins (ONAN – Oil Natural Air Natural).

• Fans (ONAF – Oil Natural Air Forced).

6. Protection Devices:

• Buchholz stafett (gas detection for internal faults).

• Trykkavlastningsventil.

• Temperature sensors (oil/winding).

Types of Oil-Immersed Transformers

1. Hermetically Sealed

• Fully sealed tank (no oil exposure to air).

• No conservator; lite vedlikehold.

2. Conservator-Type

• Expansion tank (konservator) with breather to absorb moisture.

• Common in large transformers.

3. Step-Lap Core Design

• Reduced no-load losses and noise.

4. Specialty Types:

• Brannbestandig (less-flammable oil).

• Underground (kompakt design).

Fordeler

✔ Høy effektivitet: Oil provides excellent heat dissipation.
✔ Lang levetid: Riktig vedlikeholdt, lasts 25-30 år.
✔ Kostnadseffektiv: Lower initial cost than dry-type transformers.
✔ Overbelastningskapasitet: Handles temporary overloads better.

Ulemper

✖ Brannrisiko: Olje er brannfarlig (requires fireproof barriers).
✖ Vedlikehold: Regular oil testing and leak checks needed.
✖ Environmental Concerns: Oil disposal and spill risks.

Søknader

• Power Distribution: Step-down 11kV/33kV to 400V.

• Industrianlegg: Stålverk, chemical factories.

• Fornybar energi: Wind/solar farm substations.

• Railways: Traction power supply.

Vedlikeholdskrav

1. Oil Testing:

• Dielectric strength (>30 kV for mineral oil).

• Acidity (<0.1 mg KOH/g).

• Fuktighetsinnhold (<20 ppm).

2. Leak Inspection: Check gaskets, welds, and valves.

3. Sludge Removal: Clean oil ducts periodically.

Standarder & Sertifiseringer

• IEC 60076: International standards.

• IEEE C57.12.00: North American standards.

• GB/T 6451: Chinese standards.

Oil-Immersed vs. Transformatorer av tørr type

Purchasing Considerations

1. Kapasitet (kVA): Match to load requirements.

2. Spenningsforhold: Input/output voltage levels.

3. Impedance: Typically 4–10% for distribution transformers.

4. Environment: Indoor/outdoor, temperatur, fuktighet.

5. Sertifiseringer: Ensure compliance with local regulations.

FAQ

Q: Can oil-immersed transformers be used indoors?
EN: Ja, but require fireproof vaults and ventilation (NFPA 70 regler).

Q: How often should oil be tested?
EN: Annually for routine checks; after overloads or faults.

Q: Are biodegradable oils reliable?
EN: Ja, synthetic esters offer similar performance with lower fire risk.

For acustomized selection, provide:

• Load details (kVA, spenning).

• Installasjonsmiljø.

• Special requirements (f.eks., lite støy, high efficiency).