எண்ணெய் மூழ்கிய விநியோக மின்மாற்றிகளின் முக்கிய அம்சங்கள்

எண்ணெய் மூழ்கிய விநியோக மின்மாற்றிகளின் முக்கிய அம்சங்கள்

Anoil-immersed distribution transformer is a type of electrical transformer that uses insulating oil as both a coolant and dielectric medium. These transformers are widely used in power distribution networks to step down voltage levels (typically from 11kV/33kV to 415V/240V) for industrial, வணிக, and residential applications.

1. குளிர்ச்சி& காப்பு

• Mineral oil or synthetic ester oil is used to dissipate heat and provide electrical insulation.

• The oil also prevents oxidation and moisture absorption, extending transformer life.

2. Construction

• கோர்: Made of laminated silicon steel to reduce eddy current losses.

• முறுக்குகள்: Copper or aluminum conductors (எச்.வி & LV windings).

• Tank: Sealed or conservator-type (with a breather to prevent moisture ingress).

• புஷிங்ஸ்: Porcelain or polymer insulators for cable connections.

• Radiators/Fins: Enhance cooling by increasing surface area.

3. வகைகள்

• Hermetically Sealed: Fully sealed to prevent oil oxidation (no conservator).

• Conservator-Type: Uses an oil expansion tank (காப்பாளர்)       with a breather.

• ஓனான் (எண்ணெய் இயற்கை காற்று இயற்கை): Passive cooling (natural oil & air circulation).

• ஆன் ஆஃப் (Oil Natural Air Forced): Fans are added for better cooling at higher loads.

4. நன்மைகள்

• Efficient heat dissipation, allowing higher load capacity.

• நீண்ட சேவை வாழ்க்கை (20-30 years with proper maintenance).

• Reliable performance in varied environmental conditions.

• Lower initial cost compared to dry-type transformers.

5. தீமைகள்

• Fire risk due to flammable oil (requires fire safety measures).

• Regular maintenance needed (oil testing, leakage checks).

• Environmental concerns (oil disposal, potential spills).

6. விண்ணப்பங்கள்

• Power distribution networks (utility substations).

• Industrial plants, வணிக கட்டிடங்கள், and residential complexes.

• Renewable energy systems (solar/wind farms).

Maintenance Requirements

• Oil Testing: Check dielectric strength, moisture content, and acidity.

• Leak Inspection: Ensure no oil seepage from gaskets or welds.

• Bushing & Winding Checks: Detect insulation degradation.

• Sludge Removal: Prevent clogging in cooling ducts.

Standards & Certifications

• IEC 60076 (International standards for power transformers).

• IEEE C57.12.00 (General requirements for liquid-immersed transformers).

• IS 1180 (Indian Standard for oil-immersed distribution transformers).

Comparison with Dry-Type Transformers

முடிவுரை

Oil-immersed distribution transformers are cost-effective and efficient for medium-to-high power distribution but require careful handling due to oil-related risks. They remain the preferred choice for outdoor and high-load applications where cooling efficiency is critical.