Key Features of Oil-Immersed Distribution Transformers

Key Features of Oil-Immersed Distribution Transformers

Anoil-immersed distribution transformer is a type of electrical transformer that uses insulating oil as both a coolant and dielectric medium. These transformers are widely used in power distribution networks to step down voltage levels (typically from 11kV/33kV to 415V/240V) for industrial, tráchtála, and residential applications.

1. Fuarú& Insliú

• Mineral oil or synthetic ester oil is used to dissipate heat and provide electrical insulation.

• The oil also prevents oxidation and moisture absorption, extending transformer life.

2. Construction

• Croílár: Made of laminated silicon steel to reduce eddy current losses.

• Foirceannadh: Copper or aluminum conductors (HV & LV windings).

• Umar: Sealed or conservator-type (with a breather to prevent moisture ingress).

• Bushings: Porcelain or polymer insulators for cable connections.

• Radiators/Fins: Enhance cooling by increasing surface area.

3. Cineálacha

• Hermetically Sealed: Fully sealed to prevent oil oxidation (no conservator).

• Conservator-Type: Uses an oil expansion tank (caomhnóir)       le breather.

• ONAN (Ola Aer Nádúrtha Nádúrtha): Passive cooling (natural oil & air circulation).

• AR OFF (Oil Natural Air Forced): Fans are added for better cooling at higher loads.

4. Buntáistí

• Efficient heat dissipation, allowing higher load capacity.

• Saol seirbhíse fada (20-30 years with proper maintenance).

• Reliable performance in varied environmental conditions.

• Lower initial cost compared to dry-type transformers.

5. Míbhuntáistí

• Fire risk due to flammable oil (requires fire safety measures).

• Regular maintenance needed (oil testing, leakage checks).

• Environmental concerns (oil disposal, potential spills).

6. Feidhmchláir

• Power distribution networks (utility substations).

• Gléasraí tionsclaíocha, foirgnimh thráchtála, and residential complexes.

• Renewable energy systems (solar/wind farms).

Maintenance Requirements

• Oil Testing: Check dielectric strength, moisture content, and acidity.

• Leak Inspection: Ensure no oil seepage from gaskets or welds.

• Bushing & Winding Checks: Detect insulation degradation.

• Sludge Removal: Prevent clogging in cooling ducts.

Caighdeáin & Certifications

• IEC 60076 (International standards for power transformers).

• IEEE C57.12.00 (General requirements for liquid-immersed transformers).

• IS 1180 (Indian Standard for oil-immersed distribution transformers).

Comparison with Dry-Type Transformers

Conclúid

Oil-immersed distribution transformers are cost-effective and efficient for medium-to-high power distribution but require careful handling due to oil-related risks. They remain the preferred choice for outdoor and high-load applications where cooling efficiency is critical.