33140 LiFePO4 Cylindrical Battery Cell 3.2V 15Ah

33140 LiFePO4 cylindrical cell, 3.2V 15Ah and 48Wh, with up to 3C discharge. For golf carts, forklifts and custom energy storage packs.

PRODUCT DETAILSGet a Bulk Quote

1. Product Overview

The 33140 LiFePO4 cylindrical battery cell features a nominal voltage of 3.2V and a rated capacity of 15Ah, delivering 48Wh of energy per cell. With a 33mm diameter and 140mm length, this large-format cylindrical cell is designed for battery packs that require high capacity, reliable performance and a simplified cell configuration.

Its 15Ah capacity allows battery manufacturers to build packs with fewer cells compared with smaller cylindrical formats. This can help reduce the number of cell connections and simplify pack assembly, wiring and battery management system (BMS) design.

With a cell-level energy density of approximately 180Wh/kg, the 33140 format offers a practical balance between capacity, energy density and mechanical structure. It supports applications such as golf carts, electric forklifts, low-speed electric vehicles and energy storage systems.

The cell is supplied as a bare battery cell with a PVC heat-shrink sleeve. Battery pack configuration, charging parameters and protection settings should be designed according to the approved cell datasheet.

2. Key Features

  • 15Ah Capacity: Provides 48Wh of nominal energy per cell.
  • High Energy Density: Approximately 180Wh/kg at cell level.
  • High Discharge Capability: Supports up to 3C continuous discharge, subject to manufacturer confirmation.
  • Long Cycle Life: Designed for 2,000+ cycles to 80% capacity under specified test conditions.
  • Large Cylindrical Format: Reduces the number of cells required compared with smaller cylindrical formats.
  • Flexible Pack Design: Suitable for series and parallel configurations in traction and energy storage applications.
  • LFP Chemistry: Offers good thermal stability and a long service life when operated within specified limits.

3. Technical Specifications

The following specifications are typical values for this cell format. Please confirm the final ratings and test conditions against the manufacturer's approved datasheet and shipped batch documentation.

Parameter

Specification

Chemistry

Lithium Iron Phosphate (LiFePO4 / LFP)

Model / Format

33140 Cylindrical

Nominal Voltage

3.2V

Nominal Capacity

15Ah (0.5C, 25°C)

Minimum Capacity

14.5Ah (0.5C, 25°C)

Nominal Energy

48Wh

Charge Cut-off Voltage

3.65V

Discharge Cut-off Voltage

2.0V (2.5V recommended for regular cycling, subject to datasheet)

Standard Charge Current

7.5A (0.5C)

Maximum Continuous Charge Current

15A (1C)

Maximum Continuous Discharge Current

45A (3C)

Cycle Life

≥2,000 cycles to 80% remaining capacity (1C, 25°C, specified test conditions)

Dimensions

Φ33 × 140mm

Weight

Approx. 267g

Gravimetric Energy Density

Approx. 180Wh/kg

Charging Temperature

0 to +45°C

Discharging Temperature

-20 to +45°C

Storage Temperature

-10 to +35°C

Recommended Storage Condition

Up to 12 months at 25°C and 50% SOC, subject to manufacturer guidance

Can Material

Nickel-plated steel

Sleeve

PVC heat-shrink sleeve

Positive Terminal

Flat cap with safety vent

Negative Terminal

Flat

4. Applications

The 33140 LiFePO4 cell can be used in custom battery packs for a range of applications:

  • Golf Carts and Electric Golf Trolleys: Suitable for 16-series LFP battery pack designs.
  • Electric Forklifts and Material Handling Equipment: Supports traction and power requirements, subject to the actual load profile.
  • Residential and Commercial Energy Storage: Can be assembled into battery modules for backup power and energy storage systems.
  • Electric Three-Wheelers and Light Electric Vehicles: Suitable for custom 48V-class and other compatible battery pack configurations.
  • Marine and RV Battery Systems: Can be used in 12V- and 24V-class deep-cycle battery packs.
  • Off-Grid Power Systems: Suitable for custom battery packs used with compatible inverters and charging equipment.

5. Battery Pack Design and BMS Considerations

The 33140 cell has a nominal voltage of 3.2V. A typical 16S configuration provides a nominal pack voltage of 51.2V and a maximum charging voltage of 58.4V.

Common pack configurations include:

Pack Configuration

Nominal Voltage

Nominal Capacity

Total Cells

4S7P

12.8V

105Ah

28

8S7P

25.6V

105Ah

56

16S3P

51.2V

45Ah

48

16S7P

51.2V

105Ah

112

Actual pack capacity and voltage should be matched to the application, inverter, motor controller and charging system.

Important design considerations include:

  • BMS Protection: Use a BMS with individual cell-voltage monitoring, overcharge protection, over-discharge protection, overcurrent protection and temperature monitoring.
  • Current Rating: Select the BMS, busbars, cables, connectors and protective devices according to the actual continuous and peak current requirements.
  • Parallel String Protection: Evaluate appropriate fuse protection for parallel strings and short-circuit protection for the complete battery pack.
  • Thermal Management: Consider heat generation, ventilation and temperature distribution under the intended operating conditions.
  • Mechanical Structure: Design suitable holders and enclosure supports to secure the 140mm-long cells against vibration, impact and movement.
  • Charger Compatibility: Use a charger specifically configured for the LFP battery pack. A lead-acid charger should not be used without verifying and adjusting its charging profile.

The final pack design should follow the cell manufacturer's approved electrical, thermal and mechanical specifications.

6. Compliance and Documentation

Documentation and certification requirements depend on the cell model, destination market, transportation method and final battery pack configuration.

Relevant standards and documents may include:

  • UN38.3: Lithium battery transport testing and documentation.
  • IEC 62619: Safety requirements for industrial secondary lithium cells and batteries.
  • IEC 62133-2: Safety requirements for portable sealed secondary lithium cells and batteries.
  • UL 1642: Safety standard for lithium batteries at the cell level.
  • RoHS: Restriction of hazardous substances requirements, where applicable.
  • CE Documentation: Applicable conformity documentation for products within the relevant European regulatory scope.

Please contact us to confirm available test reports, certificates and technical documents for the specific cell model before placing an order.

For a complete battery pack, additional system-level testing and documentation may be required, including electrical safety, EMC, vibration and ingress protection, depending on the intended application and market.

7. Frequently Asked Questions

Q1: How many 33140 cells are needed for a 48V 100Ah battery?

A: A typical 16S7P configuration uses 112 cells and provides 51.2V nominal voltage and 105Ah nominal capacity. The final configuration can be adjusted to meet the required capacity and system specifications.

Q2: Can the 33140 LiFePO4 cell be used in a 48V golf cart battery?

A: Yes. A 16S configuration provides 51.2V nominal voltage, which is commonly used in 48V-class LFP battery systems. The motor controller, BMS and charger must be compatible with the battery pack's voltage and current requirements.

Q3: Can I use a standard 48V lead-acid charger?

A: Not necessarily. A 16S LiFePO4 pack has a maximum charging voltage of 58.4V. The charger's voltage profile and charging stages must be checked and configured for LFP chemistry before use.

Q4: What is the maximum continuous discharge current?

A: The stated maximum continuous discharge current is 45A (3C). Actual allowable current depends on cell temperature, operating conditions and manufacturer-approved specifications.

Q5: Can you provide battery pack customization?

A: Battery pack configurations can be discussed according to your required voltage, capacity, dimensions, discharge current and application. Please share your technical requirements for evaluation.

Q6: What are the MOQ and lead time?

A: MOQ, sample availability, capacity grading, internal resistance grading and lead time depend on the specific order requirements. Please contact us for the latest information.

8. Product Inquiry

Looking for 33140 LiFePO4 cylindrical cells for your battery pack project?

Send us your required quantity, battery voltage, capacity, discharge current and application. Our team can help evaluate the cell specifications and discuss suitable battery configurations for your project.

Contact us for technical datasheets, samples and quotations.

33140 LiFePO4 Cylindrical Battery Cell 3.2V 15Ah33140 LiFePO4 Cylindrical Battery Cell 3.2V 15Ah

Send Your Inquiry Today

33140 LiFePO4 Cylindrical Battery Cell 3.2V 15Ah

Fields marked * are required.

Send Your Inquiry Today

Tell us about your application and requirements. Our team will review your request.

Fields marked * are required.