51.2V 100Ah LiFePO4 Battery Module – 5.12kWh | 16S1P | 3U Rack Mount

51.2V 100Ah LiFePO4 battery module with 5.12kWh capacity, 16S1P configuration, integrated BMS, CAN and RS485 communication. Compact 3U rack-mount design for telecom backup and energy storage applications.

PRODUCT DETAILSGet a Bulk Quote

1. Product Overview

The 51.2V 100Ah LiFePO4 Battery Module is a compact rack-mounted energy storage solution designed for applications where installation space is limited.

Built with sixteen 3.2V 100Ah prismatic LiFePO4 cells in a 16S1P configuration, this module delivers a nominal voltage of 51.2V and a total energy capacity of 5.12kWh. It integrates a battery management system (BMS), copper busbars, an insulated steel enclosure and front-access M8 terminals into one complete DC battery module.

With its compact 3U, 19-inch rack-mount design, the module is suitable for telecom backup power, compact energy storage cabinets, marine power systems and other applications requiring a space-efficient battery configuration.

The integrated BMS supports CAN 2.0B and RS485 communication, enabling battery monitoring and system integration. Up to 16 modules can be connected in parallel, subject to compatible inverter communication protocols and system configuration.

This product is a DC battery module, not an all-in-one energy storage system. It does not include an inverter, MPPT controller or AC output. It can be integrated with compatible inverters or power conversion systems (PCS) to build a complete energy storage solution.

2. Key Features and Benefits

Compact 3U Rack-Mount Design

Provides 5.12kWh of nominal energy in a 3U, 19-inch enclosure, making it suitable for cabinets and installations with limited vertical space.

LiFePO4 Battery Technology

Uses 16 prismatic lithium iron phosphate cells, offering a stable battery chemistry, good thermal characteristics and long service potential.

Integrated Battery Management System

The 16S BMS monitors cell voltage, battery current and temperature, with protection functions and passive cell balancing.

Flexible Communication Interfaces

Supports CAN 2.0B and RS485 (Modbus RTU) for communication with compatible inverters, PCS equipment and monitoring systems.

Parallel Expansion Capability

Supports parallel connection of up to 16 modules, providing a scalable battery capacity of up to 81.92kWh, subject to system compatibility and installation requirements.

Front-Access Electrical Connections

Front-mounted M8 terminals simplify cable connections and routine maintenance in compatible rack cabinets.

Multiple Installation Applications

Suitable for telecom backup power, compact commercial energy storage, marine applications and other 51.2V DC battery systems.

3. Technical Specifications

Product: 51.2V 100Ah LiFePO4 Battery Module

Parameter

Specification

Battery Chemistry

LiFePO4 (LFP)

Battery Configuration

16S1P

Nominal Voltage

51.2V

Operating Voltage Range

40.0–58.4V

Nominal Capacity

100Ah

Nominal Energy

5.12kWh

Recommended Depth of Discharge

Up to 95% (subject to BMS settings)

Continuous Charge Current

100A (1C)

Continuous Discharge Current

100A (1C)

Peak Discharge Current

200A for 10 seconds

BMS

Integrated 16S BMS

Balancing Method

Passive balancing

Balancing Current

100mA

Communication Interfaces

CAN 2.0B / RS485

Communication Protocol

Modbus RTU (RS485)

Cell Overvoltage Protection

3.65V per cell

Cell Undervoltage Protection

2.50V per cell

Low-Temperature Charge Protection

Below 0°C

Charging Temperature

0 to +55°C

Discharging Temperature

-20 to +55°C

Storage Temperature

-10 to +35°C

Enclosure Protection

IP20

Optional Enclosure

IP65 (subject to configuration confirmation)

Dimensions (W × D × H)

442 × 440 × 133 mm

Rack Size

3U, 19-inch

Weight

Approximately 44kg

Terminals

Front-access M8 studs

Enclosure Material

Steel

Enclosure Thickness

1.2mm

Performance Reference

  • Nominal energy density by weight: approximately 116Wh/kg.
  • Nominal volumetric energy density: approximately 198Wh/L.
  • Cycle life: 4,000+ cycles at the cell level, subject to the specified test conditions.

Note: Specifications are configuration-dependent. Final electrical, mechanical and environmental parameters should be confirmed against the approved product datasheet.

4. Battery Structure and Communication

Integrated Battery Architecture

The module combines the following components:

  • 16 × 3.2V 100Ah prismatic LiFePO4 cells
  • Copper busbar connection system
  • Integrated 16S battery management system
  • Insulated internal barrier
  • Steel rack-mount enclosure
  • Front-mounted M8 electrical terminals

The 16S1P configuration connects sixteen cells in series to provide a nominal voltage of 51.2V while maintaining a capacity of 100Ah.

BMS Monitoring and Protection

The integrated BMS monitors battery operating conditions and supports the following functions:

  • Cell voltage monitoring
  • Battery current monitoring
  • Temperature monitoring
  • State of Charge (SoC) reporting
  • State of Health (SoH) reporting, if supported by the BMS
  • Overvoltage protection
  • Undervoltage protection
  • Overcurrent protection, subject to BMS configuration
  • Temperature protection
  • Passive cell balancing

Communication Interfaces

The module provides two communication interfaces:

CAN 2.0B

For communication with compatible inverters and power conversion systems.

RS485

For battery monitoring, system communication and integration with compatible monitoring equipment using Modbus RTU.

The communication protocol, pin assignment and inverter compatibility should be confirmed before system installation.

5. Parallel Connection and System Expansion

The 51.2V 100Ah module supports parallel expansion for applications requiring additional battery capacity.

Up to 16 modules can be connected in parallel, subject to BMS communication support, inverter compatibility and system design.

Configuration

Total Nominal Energy

1 × 100Ah Module

5.12kWh

2 × 100Ah Modules

10.24kWh

4 × 100Ah Modules

20.48kWh

8 × 100Ah Modules

40.96kWh

16 × 100Ah Modules

81.92kWh

For a 16-module configuration, the nominal combined capacity is 1,600Ah at 51.2V, with a theoretical combined continuous current of 1,600A if every module operates at its rated 100A.

Actual system output depends on the inverter or PCS, busbar design, cable sizing, protective devices, thermal management and BMS communication architecture.

Installation Note: Configure module addresses and communication settings according to the approved installation manual. Ensure that all modules have compatible voltage and operating conditions before connecting them in parallel. Do not assume that every inverter supports 16 parallel battery modules.

6. Charging, Operating and Installation Guidelines

Charging Requirements

The module operates within a nominal voltage platform of 51.2V.

The specified upper voltage limit is 58.4V, equivalent to 3.65V per cell in a 16S configuration.

Use a compatible LiFePO4 charging profile and follow the manufacturer's recommended charging voltage, current and termination settings.

Avoid using an unverified lead-acid charging profile or applying charging settings outside the BMS operating limits.

Temperature Management

Recommended operating temperature ranges:

  • Charging: 0 to +55°C
  • Discharging: -20 to +55°C

The module should be installed in a suitable environment with adequate ventilation and sufficient clearance for electrical connections, maintenance and heat dissipation.

Actual cabinet spacing and ventilation requirements should be determined by the system designer based on the number of modules, charging and discharging rates, and ambient temperature.

Electrical Safety

  • Use compatible cables, busbars, fuses and circuit breakers.
  • Follow the specified terminal tightening torque.
  • Confirm polarity before connecting the module.
  • Ensure proper electrical insulation and grounding arrangements.
  • Follow the approved installation and operating instructions.

Transportation

Battery transportation requirements depend on the applicable transport regulations and the battery's classification.

For lithium-ion battery shipments, the relevant UN38.3 test documentation and applicable transport documents should be prepared before shipment.

The battery's shipping state of charge and packaging must comply with the regulations applicable to the selected transport method.

7. Applications

The compact 3U design and 51.2V DC output make this battery module suitable for a range of energy storage and backup power applications.

Telecom Backup Power

Provides DC battery capacity for telecommunications equipment and backup power cabinets.

Compact Energy Storage Systems

Can be integrated into modular battery cabinets for residential and small commercial energy storage projects, when paired with compatible power conversion equipment.

Marine Power Systems

Provides battery energy storage for compatible marine electrical systems, subject to installation and environmental protection requirements.

Industrial Backup Power

Supports backup power applications for industrial control equipment and other compatible DC loads.

Modular Battery Systems

Allows multiple battery modules to be connected in parallel to increase total storage capacity.

8. Certifications and Technical Documentation

Product certifications and compliance documents depend on the actual tested configuration, applicable regulations and available certificates.

The following documentation can be provided where available and applicable:

Document

Purpose

Product Datasheet

Electrical, mechanical and operating specifications

UN38.3 Test Summary

Lithium battery transport compliance

IEC 62619 Test Report

Safety assessment for industrial lithium batteries

CE Declaration of Conformity

Applicable EU regulatory compliance

RoHS Documentation

Restriction of hazardous substances compliance

Safety Data Sheet (SDS/MSDS)

Battery handling, storage and safety information

Installation Manual

Installation, wiring and operating instructions

Certificate of Origin (COO)

Country-of-origin documentation, where available

Additional cell-level test reports may be available separately.

Important: Certification claims must match the actual product model and supporting documentation. IEC 62619, IEC 63056, UL 1973, CE and RoHS must not be presented as product certifications unless the relevant requirements and supporting evidence have been verified.

9. Frequently Asked Questions

Q1: Is this a complete energy storage system or a battery module?

A: This is a complete DC battery module integrating LiFePO4 cells, a BMS, busbars, an enclosure and electrical terminals. It does not include an inverter or AC output. A compatible inverter or PCS is required to build a complete energy storage system.

Q2: What is the energy capacity of the 51.2V 100Ah battery module?

A: The module has a nominal voltage of 51.2V and a nominal capacity of 100Ah, providing 5.12kWh of nominal energy.

Q3: Can multiple modules be connected in parallel?

A: Yes. Up to 16 modules can be connected in parallel, subject to BMS communication support, inverter compatibility and system design. Sixteen modules provide a nominal total capacity of 81.92kWh.

Q4: Which communication protocols does the battery support?

A: The module supports CAN 2.0B and RS485 communication. RS485 uses Modbus RTU. Please confirm the communication protocol and pin configuration with your inverter manufacturer before installation.

Q5: What is the difference between a 100Ah and a 230Ah battery module?

A: Both modules use a 51.2V nominal voltage platform. The 100Ah version provides 5.12kWh in a compact 3U enclosure, while the 230Ah version provides approximately 11.78kWh. The 100Ah model is suitable for installations with limited rack space, while the 230Ah model offers higher energy capacity per module.

Q6: What are the operating temperature ranges?

A: The specified charging temperature range is 0 to +55°C, while the discharging temperature range is -20 to +55°C.

Q7: Can this battery module be customized?

A: Customization options depend on project requirements and manufacturing capabilities. Please contact us with your required voltage, capacity, communication protocol, enclosure dimensions and application details.

Q8: What is the minimum order quantity and delivery time?

A: MOQ and delivery time depend on the order quantity, product configuration and production schedule. Please contact us for a project-specific quotation.

10. Request a Quotation

Looking for a compact 51.2V rack-mounted LiFePO4 battery module for your energy storage or backup power project?

Contact our team with your project requirements.

We can help you confirm:

  • Required battery capacity and voltage
  • Parallel connection requirements
  • Inverter and BMS communication compatibility
  • Rack dimensions and installation conditions
  • Product documentation and certification requirements
  • MOQ, pricing and delivery schedule

Send us your project specifications to receive a suitable battery solution and quotation.

Send Your Inquiry Today

51.2V 100Ah LiFePO4 Battery Module – 5.12kWh | 16S1P | 3U Rack Mount

Fields marked * are required.

Send Your Inquiry Today

Tell us about your application and requirements. Our team will review your request.

Fields marked * are required.