51.2V 230Ah LiFePO4 Battery Module – 11.78kWh | 16S1P | 5U Rack Mount

51.2V 230Ah LiFePO4 battery module, 11.78kWh, 16S1P, 150A continuous current and CAN/RS485 communication. 5U rack-mount design.

PRODUCT DETAILSGet a Bulk Quote

1. Product Overview

The 51.2V 230Ah LiFePO4 Battery Module is a high-capacity rack-mounted battery solution designed for commercial energy storage, backup power and modular battery systems.

Built with sixteen 3.2V 230Ah prismatic LiFePO4 cells in a 16S1P configuration, this module delivers a nominal voltage of 51.2V and a total energy capacity of 11.78kWh.

It integrates a battery management system (BMS), copper busbars, internal insulation and a steel enclosure into one complete DC battery module. With a 5U, 19-inch rack-mount design, it provides a practical balance between energy capacity and installation space.

The integrated BMS supports CAN 2.0B and RS485 communication, allowing the module to work with compatible inverters, power conversion systems (PCS) and battery monitoring equipment.

Multiple modules can be connected in parallel to expand the total battery capacity, subject to communication compatibility and system design.

Designed for modular energy storage applications, this 51.2V 230Ah battery module provides 11.78kWh of nominal energy in a compact 5U rack-mounted enclosure.

Please note that this is a DC battery module, not an all-in-one energy storage system. It does not include an inverter, MPPT controller or AC output.

2. Key Features and Benefits

11.78kWh High Energy Capacity

Provides 11.78kWh of nominal energy at 51.2V, reducing the number of individual modules required for larger battery storage configurations.

5U 19-Inch Rack-Mount Design

Designed for standard 19-inch rack cabinets, with dimensions of 442 × 560 × 222 mm. Suitable for modular battery installations in commercial and industrial environments.

LiFePO4 Battery Chemistry

Uses sixteen prismatic lithium iron phosphate cells, offering stable electrochemical performance, good thermal characteristics and long cycle life potential.

Integrated 16S Battery Management System

The BMS monitors cell voltage, battery current and temperature, and provides battery protection and passive balancing functions.

150A Continuous Charge and Discharge

Supports up to 150A continuous charging and discharging, with a specified peak discharge current of 300A for 10 seconds.

CAN and RS485 Communication

Supports CAN 2.0B and RS485 Modbus RTU communication for integration with compatible inverters and battery monitoring systems.

Flexible Parallel Expansion

Supports parallel connection of multiple modules, with a maximum configuration of up to 16 units, subject to BMS and inverter compatibility.

Front-Access Electrical Connections

Front-mounted M8 terminals provide convenient access for electrical connections and maintenance in compatible rack cabinets.

3. Technical Specifications

Product Model: 51.2V 230Ah LiFePO4 Battery Module

Electrical Specifications

Parameter

Specification

Battery Chemistry

LiFePO4 (LFP)

Cell Configuration

16S1P

Nominal Voltage

51.2V

Operating Voltage Range

40.0–58.4V

Nominal Capacity

230Ah

Nominal Energy

11.78kWh

Recommended Depth of Discharge

Up to 95% (subject to BMS settings)

Continuous Charge Current

150A

Continuous Discharge Current

150A

Peak Discharge Current

300A for 10 seconds

Module DC Internal Resistance

≤12mΩ (1kHz, 25°C, 50% SoC)

Cycle Life

≥4,000 cycles at 25°C; ≥2,000 cycles at 45°C (cell-level reference)

BMS

Integrated 16S BMS

Balancing Method

Passive balancing

Balancing Current

100mA

Communication Interfaces

CAN 2.0B / RS485

Communication Protocol

Modbus RTU (RS485)

Protection and Environmental Specifications

Parameter

Specification

Cell Overvoltage Protection

3.65V per cell

Cell Undervoltage Protection

2.50V per cell

Low-Temperature Charge Protection

Below 0°C

Charging Temperature

0 to +55°C

Discharging Temperature

-20 to +55°C

Storage Temperature

-10 to +35°C

Recommended Storage SoC

30–50%

Enclosure Protection

IP20

Optional Enclosure

IP65 (subject to configuration confirmation)

Mechanical Specifications

Parameter

Specification

Dimensions (W × D × H)

442 × 560 × 222 mm

Rack Size

5U, 19-inch

Weight

Approximately 85kg

Terminals

Front-access M8 studs

Terminal Tightening Torque

8N·m (to be confirmed)

Enclosure Material

Steel

Enclosure Thickness

1.2mm

Surface Treatment

Powder coating

Nominal Gravimetric Energy Density

Approximately 138Wh/kg

Nominal Volumetric Energy Density

Approximately 214Wh/L

Note: The specifications above represent the proposed configuration. Final parameters, performance conditions and available options should be confirmed against the approved production datasheet.

4. Battery Architecture and BMS

16S1P Battery Configuration

The module consists of sixteen 3.2V 230Ah prismatic LiFePO4 cells connected in series.

This configuration provides:

  • Nominal voltage: 51.2V
  • Nominal capacity: 230Ah
  • Nominal energy: 11.78kWh

Copper busbars connect the cells to form a complete battery string. The integrated BMS monitors battery operating conditions and manages protection functions.

Integrated BMS Functions

The BMS is designed to support:

  • Individual cell voltage monitoring
  • Battery current monitoring
  • Battery temperature monitoring
  • State of Charge (SoC) monitoring
  • State of Health (SoH) monitoring, if supported by the BMS
  • Overvoltage protection
  • Undervoltage protection
  • Overcurrent protection, subject to configuration
  • Temperature protection
  • Passive cell balancing

The specified passive balancing current is 100mA.

Communication Interfaces

CAN 2.0B

Supports communication with compatible inverters and power conversion systems.

RS485 (Modbus RTU)

Supports battery data transmission, system monitoring and integration with compatible control equipment.

Communication protocols, pin assignments and inverter compatibility should be confirmed before installation.

5. Parallel Connection and Capacity Expansion

The 51.2V 230Ah battery module supports parallel connection for larger energy storage requirements.

Multiple modules can be connected to increase the total system capacity, subject to BMS communication compatibility, inverter support and electrical system design.

Number of Modules

Total Capacity

Nominal Energy

1

230Ah

11.78kWh

2

460Ah

23.56kWh

4

920Ah

47.12kWh

8

1,840Ah

94.24kWh

16

3,680Ah

188.48kWh

For example, four modules connected in parallel provide a nominal energy capacity of 47.12kWh at 51.2V.

The actual system output depends on the inverter or PCS, BMS communication, busbar configuration, cable sizing, circuit protection and thermal management.

Installation Note: Do not mix battery modules with different capacities or configurations on the same parallel bus unless the manufacturer has explicitly approved the arrangement. Follow the approved wiring diagram and installation instructions.

6. Charging and Installation Guidelines

Charging Requirements

The module has a nominal voltage of 51.2V and a specified maximum voltage of 58.4V.

A compatible LiFePO4 charging profile should be used according to the manufacturer's recommended voltage, current and termination settings.

Do not use an unverified lead-acid charging profile or exceed the BMS operating limits.

Thermal Management

The module is designed for installation in suitable battery cabinets with adequate ventilation and heat dissipation.

For high-temperature environments, particularly commercial and industrial installations, the system designer should consider:

  • Ambient operating temperature
  • Continuous charge and discharge current
  • Cabinet ventilation
  • Module spacing
  • Total installed battery capacity
  • Heat generated by adjacent PCS and electrical equipment

The actual ventilation requirements should be determined through system-level thermal assessment.

Electrical Installation

  • Use appropriately rated cables, busbars and protective devices.
  • Confirm battery polarity before connection.
  • Follow the specified terminal tightening torque.
  • Ensure proper electrical insulation and grounding.
  • Confirm communication settings before connecting multiple modules.
  • Follow the manufacturer's installation and operating instructions.

Transportation

Lithium-ion battery transportation must comply with applicable dangerous goods regulations.

UN38.3 test documentation and the required transport documents should be prepared before shipment. Packaging, state of charge and handling arrangements must meet the requirements of the selected transport method.

7. Applications

The 51.2V 230Ah LiFePO4 battery module is designed for modular energy storage and backup power applications.

Commercial and Industrial Energy Storage

Provides battery capacity for modular commercial and industrial energy storage systems when integrated with compatible PCS equipment.

Residential Energy Storage

Can be used in larger residential battery systems requiring rack-mounted battery modules and compatible inverter configurations.

Telecom Backup Power

Provides DC battery storage for telecommunications backup power cabinets and supporting equipment.

Industrial Backup Systems

Supports backup power for compatible industrial equipment, control systems and DC loads.

Modular Battery Storage

Allows multiple modules to be connected in parallel to increase the total installed energy capacity.

8. Certifications and Technical Documentation

Product compliance and certification should be supported by valid documents applicable to the actual battery module configuration.

The following documents can be provided where available:

Document

Scope

Availability

Product Datasheet

Electrical, mechanical and environmental specifications

PDF download

UN38.3 Test Summary

Lithium battery transport testing

Subject to product documentation

IEC 62619 Report

Industrial lithium battery safety

If available for this model

CE Declaration of Conformity

Applicable EU regulatory requirements

If applicable and available

RoHS Documentation

Restriction of hazardous substances

If available

Safety Data Sheet (SDS/MSDS)

Battery handling and safety information

PDF download

Installation Manual

Installation, wiring and operation

PDF download

Certificate of Origin (COO)

Country of origin

Available according to order requirements

Additional cell-level reports may be available separately.

Certification Notice: Only display certification marks supported by valid certificates, declarations or test reports applicable to this product. Company-level management certifications, such as ISO 9001, should be presented separately from product certifications.

9. Frequently Asked Questions

Q1: What is the energy capacity of the 51.2V 230Ah battery module?

A: The module has a nominal voltage of 51.2V and a capacity of 230Ah, providing 11.78kWh of nominal energy.

Q2: What is the difference between the 230Ah and 280Ah battery modules?

A: Both models belong to the 51.2V rack-mounted battery family. They differ in cell capacity, internal cell dimensions and overall battery specifications. The best choice depends on the required energy capacity, cabinet space, thermal conditions and project budget. Please compare the approved datasheets before selecting a model.

Q3: Is this battery suitable for a 5kW or 10kW inverter?

A: At 51.2V, a 5kW DC load requires approximately 98A, while a 10kW DC load requires approximately 195A, excluding conversion losses. One module supports 150A continuous discharge, so a single module may support a 5kW application under suitable conditions. A 10kW application generally requires multiple modules in parallel. Final sizing depends on inverter efficiency, operating voltage and peak power requirements.

Q4: Can multiple 230Ah modules be connected in parallel?

A: Yes. Up to 16 modules can be connected in parallel, subject to BMS communication compatibility and inverter support. Sixteen modules provide a nominal energy capacity of 188.48kWh.

Q5: Can the 100Ah and 230Ah modules be connected to the same battery system?

A: Modules with different capacities or configurations should not be connected to the same parallel battery bus unless the manufacturer has verified and approved the arrangement. Separate battery groups or compatible system configurations may be required.

Q6: Which communication interfaces are available?

A: The module supports CAN 2.0B and RS485 communication. RS485 uses the Modbus RTU protocol. Please confirm inverter compatibility and communication settings before installation.

Q7: What are the operating temperature ranges?

A: The specified charging temperature range is 0 to +55°C, while the discharging temperature range is -20 to +55°C.

Q8: Can the battery module be customized?

A: Customization options depend on project requirements and manufacturing capabilities. Please provide your required voltage, capacity, communication protocol, enclosure dimensions and application details for evaluation.

Q9: What are the MOQ and delivery time?

A: MOQ and delivery time depend on order quantity, product configuration and production schedule. Contact us for a project-specific quotation.

10. Request a Quotation

Looking for a high-capacity 51.2V LiFePO4 battery module for your energy storage project?

Our 230Ah rack-mounted battery module provides 11.78kWh of nominal energy, integrated BMS protection and CAN/RS485 communication.

Contact us with your project requirements to discuss:

  • Battery capacity and voltage
  • Parallel connection requirements
  • Inverter and BMS compatibility
  • Rack dimensions and installation conditions
  • Technical documentation and certification
  • MOQ, pricing and delivery schedule

Send us your project specifications to receive a suitable battery solution and quotation.

Send Your Inquiry Today

51.2V 230Ah LiFePO4 Battery Module – 11.78kWh | 16S1P | 5U Rack Mount

Fields marked * are required.

Send Your Inquiry Today

Tell us about your application and requirements. Our team will review your request.

Fields marked * are required.