1 / 3
51.2V 314Ah LiFePO4 Battery Module 16.08kWh 16S1P 5U Rack
51.2V 314Ah LiFePO4 battery module with 16.08kWh capacity, 200A continuous current, CAN/RS485 communication and 5U rack design.
PRODUCT DETAILSGet a Bulk Quote1. Product Overview
The 51.2V 314Ah LiFePO4 Battery Module is a high-capacity lithium battery solution designed for 48V energy storage systems. With a 16S1P configuration, it delivers a nominal energy of 16.08kWh in a 5U rack-mount enclosure.
The module measures 442 × 600 × 222mm and weighs approximately 108kg. It combines high-capacity LFP cells, an integrated Battery Management System (BMS), and a compact 19-inch rack design.
Compared with a 51.2V 280Ah module in the same enclosure size, the 314Ah version provides approximately 12.1% more nominal capacity. This allows system designers to achieve higher energy capacity per module slot, subject to cabinet, electrical, and system compatibility.
The module is a DC battery unit with an integrated BMS. It does not include an inverter or power conversion system. It can be integrated into compatible residential and commercial energy storage systems.
Important: Although the 314Ah and 280Ah versions may share the same enclosure dimensions, they should not be treated as direct replacements without checking electrical ratings, protection settings, inverter compatibility, and system certification requirements.
2. Key Features and Benefits
- 16.08kWh nominal energy: Provides higher energy capacity in a 5U rack-mount enclosure.
- 314Ah LFP cell configuration: Uses a 16S1P battery architecture for 51.2V energy storage systems.
- 200A continuous current: Supports continuous charge and discharge up to the specified current, subject to operating conditions.
- Integrated BMS: Provides cell monitoring, voltage protection, temperature monitoring, and battery management functions.
- CAN and RS485 communication: Supports communication with compatible inverters and energy management systems.
- Rack-mount design: 442 × 600 × 222mm enclosure for compatible 19-inch rack systems.
- Expandable system capacity: Multiple modules can be connected in parallel when supported by the BMS, inverter, and system design.
- LFP chemistry: Offers the thermal stability and long cycle life associated with lithium iron phosphate batteries.
3. Technical Specifications
Table 1. Technical specifications of the 51.2V 314Ah LiFePO4 Battery Module. Values should be confirmed against the approved production datasheet for the supplied model.
Electrical Specifications
Parameter | Specification |
|---|---|
Battery chemistry | LiFePO4 (LFP) |
Battery configuration | 16S1P |
Nominal voltage | 51.2V |
Operating voltage range | 40.0–58.4V |
Nominal capacity | 314Ah |
Nominal energy | 16.08kWh |
Usable energy | Approx. 15.27kWh at 95% DoD (calculated) |
Continuous charge current | 200A |
Continuous discharge current | 200A |
Peak discharge current | 400A for 10 seconds |
Module DC internal resistance | ≤9mΩ (1kHz, 25°C, 50% SoC) |
Cycle life | ≥8,000 cycles to 80% SoH at 0.5C/0.5C, 25°C (cell-level reference) |
BMS and Protection
Parameter | Specification |
|---|---|
BMS configuration | 16S |
Cell balancing | Passive balancing, 100mA |
Communication | CAN 2.0B / RS485 Modbus RTU |
Address setting | DIP switch, up to 16 addresses (subject to confirmation) |
Over-voltage protection | 3.65V per cell (proposed threshold; confirm BMS settings) |
Under-voltage protection | 2.50V per cell (proposed threshold; confirm BMS settings) |
Low-temperature charging protection | Charging inhibited below 0°C (confirm exact threshold and recovery logic) |
Monitoring | Cell voltage, battery voltage, current and temperature (confirm available communication data) |
Mechanical and Environmental Specifications
Parameter | Specification |
|---|---|
Dimensions (W × D × H) | 442 × 600 × 222mm |
Rack height | 5U |
Enclosure | Steel, powder-coated |
Enclosure thickness | 1.2mm (to be confirmed) |
Approximate weight | 108kg |
Ingress protection | IP20 standard; IP65 version subject to availability and verification |
Charging temperature | 0 to +55°C |
Discharging temperature | −20 to +55°C |
Storage temperature | −10 to +35°C |
Storage condition | Up to 12 months at 25°C and 30–50% SoC (subject to manufacturer guidance) |
Terminals | Front-access M8 studs (confirm terminal torque) |
Note: Electrical performance, protection thresholds, operating limits, and mechanical details must be checked against the final approved datasheet before publication.
4. Module Architecture and BMS
The battery module uses a 16S1P configuration, consisting of 16 LFP cells connected in series. Its nominal voltage is 51.2V, with a rated capacity of 314Ah.
An integrated 16S Battery Management System monitors battery operating conditions and provides protection functions. The BMS supports CAN 2.0B and RS485 Modbus RTU communication for integration with compatible inverters and energy storage control systems.
The module uses a 5U, 19-inch rack-mount enclosure. Its front-access interface is designed to simplify electrical connection and system maintenance.
At approximately 108kg, the module requires suitable lifting equipment for handling and installation. Side handles, if provided, should only be used according to the manufacturer's handling instructions.
5. Parallel Connection and Capacity Expansion
Multiple 51.2V 314Ah modules can be connected in parallel to increase the total system capacity.
The following table shows the theoretical nominal energy for different module quantities.
Number of Modules | Nominal Capacity | Nominal Energy |
|---|---|---|
1 | 314Ah | 16.08kWh |
2 | 628Ah | 32.15kWh |
3 | 942Ah | 48.23kWh |
4 | 1,256Ah | 64.31kWh |
6 | 1,884Ah | 96.46kWh |
8 | 2,512Ah | 128.61kWh |
16 | 5,024Ah | 257.23kWh |
Values are calculated from nominal voltage and capacity. Actual usable energy depends on the configured depth of discharge, operating conditions, and system limits.
Before connecting multiple modules in parallel, check:
- BMS communication and address configuration.
- Inverter compatibility and supported battery protocols.
- Cable, busbar, fuse, and circuit-breaker ratings.
- Module voltage and SoC matching before connection.
- Maximum supported parallel quantity.
- Cabinet ventilation and thermal management.
- Applicable system certification and installation requirements.
Do not mix 314Ah and 280Ah modules in the same battery bank unless the battery manufacturer and system designer have approved the configuration. Differences in capacity, internal resistance, BMS settings, and operating characteristics may affect current sharing and system performance.
6. Charging, Installation and Operating Guidelines
The module is designed for integration into compatible 48V battery energy storage systems.
For safe and reliable operation:
- Use a compatible charger or inverter with the correct battery charging profile.
- Confirm the recommended charge voltage and current with the approved datasheet.
- Configure the inverter communication protocol and battery parameters correctly.
- Install appropriate fuses, circuit breakers, and DC cables.
- Provide sufficient ventilation and follow the recommended installation clearances.
- Avoid installation in environments outside the specified temperature and humidity limits.
- Use suitable lifting equipment when moving or installing the approximately 108kg module.
The maximum continuous current does not automatically guarantee a specific inverter output. Actual power depends on battery voltage, inverter efficiency, operating temperature, BMS limits, and system configuration.
For example, a 10kW DC load at 51.2V nominal voltage requires approximately 195A, which is close to the stated 200A continuous discharge rating. The available output at lower battery voltage or under high-temperature conditions may be lower. The inverter and battery system should therefore be evaluated together before confirming a 10kW application.
7. Applications
The 51.2V 314Ah LiFePO4 Battery Module can be considered for:
- Residential energy storage systems.
- Commercial and industrial energy storage.
- 48V battery rack systems.
- Solar energy storage systems.
- Backup power systems.
- Modular battery storage projects.
The final application depends on inverter compatibility, battery configuration, installation conditions, and project requirements.
8. Certifications and Technical Documentation
Technical documents and certificates should be provided according to the actual product model, test scope, and shipment requirements.
Available Documentation
Document | Scope | Recommended Page Placement |
|---|---|---|
Module Datasheet | Electrical, mechanical, environmental and interface specifications | Product page download |
UN38.3 Test Summary | Lithium battery transport testing | Product page download |
IEC 62619 Report | Industrial lithium battery safety, if the assembled module is covered by the report | Product page download when available |
IEC 63056 Report | Safety requirements for lithium batteries used in electrical energy storage systems, where applicable | Relevant product page according to report scope |
UL 1973 | Battery safety listing for stationary applications, only if the exact product is listed | Badge only when verified |
CE Declaration | Applicable EU legislation and standards for the actual product | Product page download when available |
RoHS Report | Restricted substances compliance | Product page download when available |
SDS / MSDS | Safety information for transport and handling | Product page download |
Certification note: Only display certificates and test reports that are valid and applicable to the exact product model or clearly defined product family. A cell-level test report must not be presented as certification of the complete battery module. ISO 9001 should be displayed on the company or factory page as a management-system certification, not as a product certification.
9. Media and Trust Assets
To improve product credibility and support B2B buyers, the page should include the following materials:
Product Images
- Main product image showing the complete 5U rack-mount module.
- Front-panel image showing terminals, communication ports, and DIP switches.
- Internal structure image showing the cell arrangement and BMS.
- Product dimension drawing.
Factory and Quality Control Photos
- Real battery module assembly photographs.
- Busbar connection and welding process.
- Terminal installation and torque inspection.
- Battery testing and ageing equipment.
- Finished product inspection and packaging.
Technical Documents
- Module datasheet PDF.
- Applicable UN38.3 test summary.
- Applicable IEC or UL reports, if available.
- SDS / MSDS.
- Relevant compliance declarations and test reports.
Use real production and testing photographs wherever possible. Rendered images should be clearly identified as product illustrations rather than actual factory photographs.
10. Frequently Asked Questions
Q1: What is the nominal energy of the 51.2V 314Ah battery module?
A: The module has a nominal voltage of 51.2V and a rated capacity of 314Ah, providing approximately 16.08kWh of nominal energy.
Q2: What is the difference between the 314Ah and 280Ah modules?
A: Both versions may use the same 5U enclosure dimensions of 442 × 600 × 222mm. The 314Ah version provides approximately 16.08kWh, compared with 14.34kWh for the 280Ah version. Electrical ratings and system settings must be checked before selecting or replacing either model.
Q3: Can this battery module be used with a 10kW inverter?
A: The module has a stated continuous discharge current of 200A. At 51.2V nominal voltage, this corresponds to approximately 10.24kW of DC power before inverter losses. Actual output depends on battery voltage, operating temperature, inverter requirements, and BMS limits. Please confirm system compatibility before installation.
Q4: Can multiple 314Ah modules be connected in parallel?
A: Yes, parallel connection can increase total battery capacity. The maximum number of modules depends on BMS communication, inverter compatibility, and the overall system design.
Q5: Does the battery module include an inverter?
A: No. This is a DC battery module with an integrated BMS. It requires a compatible inverter or power conversion system for AC applications.
Q6: What documents are available for this battery module?
A: A product datasheet and relevant transport and safety documents can be provided according to the actual product configuration and available test reports. Please contact us for the document list for your project.
Q7: What is the MOQ and lead time?
A: MOQ and lead time depend on the selected configuration, order quantity, and production schedule. Please contact us for a current quotation.
11. Request a Quotation
Looking for a high-capacity 51.2V battery module for your energy storage project?
Contact our team with your required capacity, inverter model, communication protocol, installation environment, and order quantity. We can help you check product compatibility and provide a suitable battery solution.
Contact us for technical details, pricing, and project support.
Send Your Inquiry Today
51.2V 314Ah LiFePO4 Battery Module 16.08kWh 16S1P 5U Rack
